Microduino-Module Amplifier

Language:	English  • 中文

Microduino-LM4863 Microduino-Amplifier is the double-channel audio power amplifier module.

Feature 2.54 connector with good compatibility; Power-on noise offset and uni-gain stable; Small, cheap, stackable and open Open hardware circuit design and Arduino compatible programming development environment; Uniform Microduino interface standard and rich peripheral modules, capable of having a fast and flexible connection and extension with other modules and sensors in accord with Microduino interface standard; Easy to be integrated to pegboards with a 2.45-pitch female header connector interface.

Specifications Offer 2.2W output for 4Ω load; Operating Voltage：2.0-5.5V； Externally controlled low-power shutdown mode with the typical shutdown current of 0.7uA. Microduino-LM4863-Pinout Microduino-LM4863-Pinout Document Eagle PCB File:Microduino-LM4863.zip Main Component Amplifier chip：LM4863 File:LM4863.pdf Development Make sure the current(5v) can reach 500ma. The Microduino-USBTTL debugging is not recommended since the USBTTL's output current is small. Arduino library and supported package Microduino_SD_SimpleSDAudio：https://github.com/Microduino/Microduino_Tutorials/tree/master/Microduino_Libraries/_06_Microduino_SD_SimpleSDAudio How to use the library The CS pin of Microduino-SD module needs to be changed from D4 in the original library to D7; Since the original library can not support Microduino Core+ directly, we have modified this library to solve this problem; TF card(2GB of memory and lower) in FAT format is recommended. Low-power shutdown of external control In many applications, the shutdown port's level conversion is finished by the controller, but it can also be achieved by a one-way blade switch; Connect a pull-up resistor on the third pin of the second row pin female near the D13 pin, then disconnect the switch. This pin will be pulled low, so the Amplifier begin to work; Turn on the switch，the pull-up resistor will pull up the voltage,making Microduino-LM4863 stop working. Application Program Download Audio file conversion tool：File:Tools lm4863.zip The Audio experiment using Core and SD Hardware：Microduino FT232R、Microduino Core、Microduino SD、Microduino LM4863； Software：Arduino IDE（1.0 release upper）、Microduino provides test program（Arduino part）、SimpleSDAudio library、Audio file creation tools； Put the downloaded library to the libraries folder of Arduino IDE installation; Copy the "EXAMPLE.AFAM" in "examples" folder to memory card; Start Arduino IDE，open the "BareMinimum" program, choose "Microduino Core (Atmega328P@16M,5V)"and download directly； Then you can listen it！ If you want to play your own audio, just need to change the "EXAMPLE.AFM" to the name of the generated audio file. The process of making an audio file Convert any audio file into a. Wav format using a software "Format Factory"; Generate an audio file： We need to use a SoX-based tool, and then choose the appropriate conversion process according to the operating frequency of the modules; Decompress the tool，then enter“Arduino with 16 MHz”folder，put the audio file into this folder,and drag to "FullRate@16MHz_Stereo.bat" (16M full stereo) batch on； then you can convert the file. A dialog box will pop up "Press any key to continue ..."; After that, you will find a new folder and the converted file is there. Pictures Microduino LM4863 Front Microduino LM4863 Back