Microduino-Shield Encoder

Language:	English  • 中文

Microduino- Encoder Microduino-Encoder is application board based rotary encoder control. Feature Uniform Microduino interface standard and rich external modules, easy for connection with other modules and sensors with Microduino interface standard; Onboard analog key and sensor interface; Onboard rotary encoder. Specification Electrical specification MicroUSB power supply; 3V3 stabilivolt; PWR can select different voltage value (5v or 3.3v) through jumpers; Onboard power source(5v and 3.3v) indicator; Extension Onboard reset key; OLED fixation base board; Serial RX0 and TX0 interface; Two IIC interfaces; Two analog keys connected to A6; There are bonding pads of analog serial port(A0,A1 and A2) and GND on the base board.(5v and 3.3v): Microduino-Encoder-Pinout Microduino-Encoder-Pinout Document Chip：File:Xxxx.pdf Rotary encoder：File:Xxxx.pdf Development It can has a fast connection and extension with encoder and other Microduino modules to achieve different function. Application You can download Microduino test programs to have a simple test of its function: (Rotary Encoder Test)测试旋转编码器 All Hardware: Microduino USBTTL, Microduino-Core and Microduino- Encoder； All Software: Microduino test program(Arduino terminal) and Arduino IDE(Version 1.0 or higher); Open Microduino test program with IDE, choose Microduino-Core(Atmega328P@16M,5V) as the board and then download; Open serial monitor after download and confirm baud rate as 115200; Data keeps increasing when rotating right; Data keeps decreasing when rotating left; Press down the encoder and the data clears; Purchase History Picture Front File:Microduino-Encoder-F.JPG Microduino-Encoder Front Back File:Microduino-Encoder-b.JPG Microduino-Encoder Back Video