MicroWRT was created in July, 2014.
MicroWRT is a brand new development board, designed by Makermoudle for OpenWrt;
With the MT7620A core of MIP24KEc, it is created for internet, compatible with OpenWRT;
It supports DDR2, SD, PCI-E and I2S, equipped with 64/128MbitFlash;
It is applied well in NAS, webcam, robot, OpenCV;
Here is the key: We design Microduino interface for MicroWRT, which makes it possible for you to use Microduino modules on it.
Feature
- Created for the internet;
- Small, cheap, stackable and open-source;
- Open-source hardware circuit design and OpenWRT compatible programming development environment;
- With H-PIN52 interface as well as extension board, it can have a fast connection with Microduino modules;
- 2.54-pitch pin interface makes it easily integrated to pegboard.
History
- Made a proof as the first edition on June 4, 2014;
- Made a proof as the second edition on July 26, 2014;
- Revise several bugs;
- Change power supply scheme;
- Add power supply indicator;
- Change Flash packaging;
- The third edition finished on Aug. 23, 2014;
- Introduce soft serial port, supporting I2S;
- Design JTAG interface on the core board;
- Change USB, UART, I2C and other pin definition;
- Change the position of the power supply indicator.
Specification
Main Specification
- CPU:MT7620A MIPS24KEc(580MHz)
- RAM:16-bit DDR2 512Mbit(2Gbit to the maximum)
- Flash:128Mbit
Features
|
MT7620N
|
MT7620A (MicroWRT)
|
CPU |
MIPS24KEc (600/580 MHz) |
MIPS24KEc (580 MHz)
|
Total DMIPs |
580 x 1.6 DMIPs |
580 x 1.6 DMIPs
|
I-Cache, D-Cache |
64 KB, 32 KB |
64 KB, 32 KB
|
L2 Cache |
n/a |
n/a
|
HNAT/HQoS |
HNAT |
HNAT 2 Gbps forwarding
|
Memory
|
DRAM Controller |
16 b |
16 b
|
SDRAM |
512 Mb, 120 MHz |
n/a
|
DDR1 |
512 Mb, 193 MHz |
n/a
|
DDR2 |
512 Mb, 193 MHz |
2 Gb, 193 MHz
|
NAND
|
n/a
|
Small page 512Byte (max 512M bit)
Large page 2Kbyte (max 8G bit)
|
SPI Flash
|
3B addr mode (max 128Mbit)
4B addr mode (max 512Mbit)
|
3B addr mode (max 128Mbit)
4B addr mode (max 512Mbit)
|
SD |
n/a |
SD-XC (class 10)
|
RF |
2T2R 802.11n 2.4 GHz |
2T2R 802.11n 2.4 GHz
|
PCIe |
n/a |
1
|
USB 2.0 |
1 |
1
|
Switch |
5p FE SW |
5p FE SW + RGMII(1) 4p FE SW + RGMII(2)
|
I2S |
n/a |
1
|
PCM |
n/a |
1
|
I2C |
1 |
1
|
UART |
1 (Lite) |
2 (Lite/Full)
|
JTAG |
1 |
1
|
Package |
DRQFN148- 12 mm x 12 mm |
TFBGA265- 11 mm x 11 mm
|
Interface
- SD:x1
- USB2.0:x1(Capable of extending through HUB)
- PCIe:x1
- Ethernet:2-port 10/100M
- I2C:x1
- I2S:x1
- PCM:x1
- JTAG:x1
- USRT:x2(Lite/Full)
Wireless
- 2T2R 2.4Ghz with 300Mbps PHY data rate
- Legacy 802.11b/g and 802.11n modes
- 20/40MHz channel baudwidth
- 16 Multiple BSSID
- WEP64/128,TKIP,AES,WPA,WPA2,WAPI
- QoS:WMM.WMM-P5
- WPS:PBC,PIN
Pin(20140726)
Document
Development
MicroWRT_Firmware && uboot
Application
Application Tutorial
FAQ
Pictures
|