Difference between revisions of "Arduino IDE Driver Install"

From Microduino Wiki
Jump to: navigation, search
(Created page with "{| style="width: 800px;" |- | ==Equipment== *Software： Microduino software develop environment Arduino IDE, Microduino IDE configure pagckage; *Hardware: Microduino FT232R...")
 
Line 15: Line 15:
 
*Connect the Microduino FT323R to PC with the MicUSB cable;
 
*Connect the Microduino FT323R to PC with the MicUSB cable;
  
−
*After the new hardware was recognized, then will search the deriver in system. If con't find the deriver, need install it manually.
+
*After the new hardware was recognized, then will search the driver in system. If con't find the driver, need install it manually.
  
 
*Click the right button on "computer", then click "manager".
 
*Click the right button on "computer", then click "manager".
Line 29: Line 29:
  
  
−
*Then select the derivers directory in Aduirno IDE directory.
+
*Then select the drivers directory in Aduirno IDE directory.
−
'''Note, if your computer reports that can't find the deriver, need to be further positioning to the directory \drivers\FTDI USB Drivers'''
+
'''Note, if your computer reports that can't find the driver, need to be further positioning to the directory \drivers\FTDI USB Drivers'''
  
 
[[File:Microduino-Start4.jpg|thumb|center|600px|Microduino]]
 
[[File:Microduino-Start4.jpg|thumb|center|600px|Microduino]]
  
−
*Click next, then install the deriver.
+
*Click next, then install the driver.
  
 
[[File:Microduino-Start5.jpg|thumb|center|600px|Microduino]]
 
[[File:Microduino-Start5.jpg|thumb|center|600px|Microduino]]
Line 40: Line 40:
 
[[File:Microduino-Start6.jpg|thumb|center|600px|Microduino]]
 
[[File:Microduino-Start6.jpg|thumb|center|600px|Microduino]]
  
−
*After the deriver installed successfully, you can see the COM port.
+
*After the driver installed successfully, you can see the COM port.
 
[[File:Microduino-Start7.jpg|thumb|center|600px|Microduino]]
 
[[File:Microduino-Start7.jpg|thumb|center|600px|Microduino]]
  
 
|}
 
|}

Revision as of 02:20, 3 March 2014

Equipment

  • Software：

Microduino software develop environment Arduino IDE, Microduino IDE configure pagckage;

  • Hardware:

Microduino FT232R、USB cable；

Congfigure procedure

  • Download Arduino IDE

http://arduino.cc/en/Main/Software

  • Uncompress the Arduino IDE package to a specific folder;
  • Connect the Microduino FT323R to PC with the MicUSB cable;
  • After the new hardware was recognized, then will search the driver in system. If con't find the driver, need install it manually.
  • Click the right button on "computer", then click "manager".
Microduino
  • Then open the "Device Manager", you can see the uncognized hardward with a exclamation.
Microduino
  • Click right button on un-recognized hardware, select update driver software. In the pop-up dialog, select search computer for driver software.
Microduino


  • Then select the drivers directory in Aduirno IDE directory.

Note, if your computer reports that can't find the driver, need to be further positioning to the directory \drivers\FTDI USB Drivers

Microduino
  • Click next, then install the driver.
Microduino
Microduino
  • After the driver installed successfully, you can see the COM port.
Microduino
Retrieved from "https://wiki.microduinoinc.com/index.php?title=Arduino_IDE_Driver_Install&oldid=2993"