Arduino IDE Driver Install

From Microduino Wiki
Revision as of 02:19, 3 March 2014 by Pkj (talk) (Created page with "{| style="width: 800px;" |- | ==Equipment== *Software: Microduino software develop environment Arduino IDE, Microduino IDE configure pagckage; *Hardware: Microduino FT232R...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Equipment

  • Software:

Microduino software develop environment Arduino IDE, Microduino IDE configure pagckage;

  • Hardware:

Microduino FT232R、USB cable;

Congfigure procedure

  • Download Arduino IDE

http://arduino.cc/en/Main/Software

  • Uncompress the Arduino IDE package to a specific folder;
  • Connect the Microduino FT323R to PC with the MicUSB cable;
  • After the new hardware was recognized, then will search the deriver in system. If con't find the deriver, need install it manually.
  • Click the right button on "computer", then click "manager".
Microduino
  • Then open the "Device Manager", you can see the uncognized hardward with a exclamation.
Microduino
  • Click right button on un-recognized hardware, select update driver software. In the pop-up dialog, select search computer for driver software.
Microduino


  • Then select the derivers directory in Aduirno IDE directory.

Note, if your computer reports that can't find the deriver, need to be further positioning to the directory \drivers\FTDI USB Drivers

Microduino
  • Click next, then install the deriver.
Microduino
Microduino
  • After the deriver installed successfully, you can see the COM port.
Microduino