Getting started: Mixly for Mac

From Microduino Wiki
Revision as of 19:14, 20 October 2016 by Sonny (talk) (Download)
Jump to: navigation, search

Download

Mixly Mac Setup.png

Installation

  • Change your settings to allow identified developers by going to: (Apple Logo) >>> System Preferences...
  • Then go to Security & Privacy.

MacTutorial Settings 2.png

  • Click on then Lock icon and enter your credentials to be able to change settings.
  • Under Allow apps download from: select App Store and identified developers
  • Click the Lock icon again to lock and save changes.

MacTutorial Settings 3.png

  • After downloading Mixly for Mac extract the zip file -OR- if you are using Safari the zip file should automatically unzip.
  • Go to the Mixly for Mac folder
  • Open the Drivers folder. Drivers are needed to communicate with the Microduino hardware.

MacTutorial 2 DmgContents.png

  • Install ONE of the driver packages:
    • Driver_OS10.3.mpkg if you have Mac OS 10.3 or below.
    • Driver_OS10.4-10.8.mpkg if you have Mac OS 10.4 to Mac OS 10.8.
    • Driver_OS10.9-Newer.mpkg if you have Mac OS 10.9 or newer.
  • Follow the on-screen instructions to install the driver.

MacTutorial 3 InstallDriver1.png

  • Once completed. Open the USBTTL-C Install folder. This is another driver that needs to be installed.
  • (Note: The Mac OS X 10.6 or older package does not contain this. Therefore, you can skip this step.)

MacTutorial 4 DriverFolder.png

  • Open CH34x_Install.pkg. Follow the on-screen instructions to install the driver.

MacTutorial 5 InstallDriver2.png

  • NOTE: You can move this entire folder to your Desktop or somewhere else for easier access.
  • Open Mixly.jar