MCookie-Motion

From Microduino Wiki
Revision as of 02:05, 24 November 2015 by 1304410487@qq.com (talk) (Development)
Jump to: navigation, search
Language: English  • 中文
MCookie-Motion-rect.jpg

mCookie-Motion module integrates three sensors including a three-axis accelerometer+ three-axis gyroscope (MPU6050) and a digital barometer sensor(BMP180), which adopts I3C interface and connects with the core modules. It can be widely used in projects such as model airplane and self-balance robot.





==Features

  • All sensors communicate with I2C , which can save IO port and can be widely used.
*Small, stackable, open and cheap; 
  • Easy to be integrated to pegboards with 2.54-pitch female header connector interface.

Specification

Digital Barometer Sensor: BMP180

  • BMP180 includes a resistance-type pressure sensor, an AD converter and a control unit.
    • Control unit contains E2PROM and I2C interface. For E2PROM, it saves 176-bit separate standard data and these data are used for adding parameters of temperature dependency and sensors.
  • Distance range: 300hPa-1100hPa (Correspond to altitude from -500m to +9000m)
  • Absolute accuracy can reach 0.03hPa to the lowest.
  • UP=Universal pressure data(16 to 19bit)
  • UT=Universal temperature data(0 to 15bit)

MPU6050

  • It integrates a three-axis MEMS gyroscope and accelerator as well as an extensible Digital Motion Processer (DMP);
  • Output fusion data of the 6-axis or 9-axis rotation matrix, Aaternion and EulerAngleforma;
  • Own accuracy of 131LSBs/°/sec and full-lattice sensing range including ±250, ±500, ±1000 and ±2000°/sec;
  • Programmable control: The program control range is±2g, ±4g, ±8g and ±16;
  • Remove sensitivity between accelerator and gyroscope; Reduce sensor drift and effects brought by settings.
  • DMP engine can reduce burden brought by complicated fusion data, sensing device synchronization and altitude induction.
  • Temperature sensor with digital output;
  • Operation current for gyroscope: 5mA; Standby current for gyroscope: 5uA; Operation current for accelerator: 500uA; Accelerator current under power saving mode: 40uA @ 10Hz up to 400kHz fast mode of IIC.
Motion-Pinout-1Big1.jpg

Document

Main Components

Development

For the development, it need to be supported by _05_Microduino_10DOF library and check the library file here: (Installation Address)\Microduino-IDE\hardware\Microduino\avr\libraries

Microduino-libraries.jpg

Project

Test MPU6050 Altitude Sensor

Test BMP180 Air-pressure Sensor

  • Open the " BMP085_basic " program of

file->examples->_05_Microduino_10DOF->sensor_BMP085.

Motion-weather-bmp180.jpg
  • Download program to the core module, open the serial monitor and you'll see data about temperature, air-pressure and altitude.
Motion-weather-res.jpg

F&Q

http://www.microduino.cc/wiki/index.php?title=Microduino-10DOF

Purchase

History

Pictures

MCookie-10DOF-t.jpg


MCookie-10DOF-b.jpg


MCookie-10DOF-t1.jpg


MCookie-10DOF-b1.jpg