Difference between revisions of "MCookie-WiFi"

From Microduino Wiki
Jump to: navigation, search
(Common AT Instruction)
Line 8: Line 8:
 
==Features==
 
==Features==
 
*Serial communication.  
 
*Serial communication.  
*Accessible for the interne.  
+
*Accessible for the internet.  
 
*Small, stackable and economic.
 
*Small, stackable and economic.
  

Revision as of 19:24, 12 May 2016

Language: English  • 中文
mCookie-WiFi

mCookie-WiFi is WIFI communication module, which can connect other WIFI devices and communicate with CoreUSB via serial port.

Features

  • Serial communication.
  • Accessible for the internet.
  • Small, stackable and economic.

Specification

  • Way of communication: Serial port transmission with the default serial port D2(RX) and D3(TX).
  • Power supply: +3.3VDC 50mA.
  • Status indicator.

Common AT Instruction

  • All AT instructions are ended with "\r\n ".
  • Common AT instruction:
    • AT+RST Restart modules
    • AT+GMR Check version info.
    • AT+CWMODE=3 Station & access point
      • 1 Station mode
      • 2 AP mode
      • 3 AP & Station
    • AT+CWLAP WIFI SSID list
    • AT+CWSMARTSTART=0 Start smart connection
      • 0: Use AL-LINK
      • 1: Use ESP-TOUCH
      • 2: Use AIR-KISS
    • AT+CWSMARTSTOP Stop smart connection
    • AT+CWJAP="<access_point_name>","<password>" Add to a certain WIFI
    • AT+CIFSR Display WIFI information
    • AT+CIPSTATUS Acquire connection status
    • AT+CIPSTART=4,"TCP","baidu.com",80 Establish TCP/UDP connection
    • AT+CIPCLOSE Shut off TCP/UDP connection (Single connection)
    • AT+CIPCLOSE=5 Close multi-connection
    • AT+CIPMUX=1 Start multi-connection

Document

Support AT instruction configuration/contro: File:ESP8266 WiFi Module Quick Start Guide v 1.0.4.pdf

Development

  • Program

File:ESP8266TestV1.zip

Change your WIFI password in the code where there are SSID(WIFI name) and password setting.

ESP8266ChangePass.png
  • Download program
    • Stacke mCookie-WiFi and mCookie-CoreUSB, plug USB cable into mCookie-CoreUSB on one side and connect computer USB socket on the other side. Then, start Arduino IDE, copy the program above to IDE, select Microduino-CoreUSB in (tools) -> (Board) and choose the right serial number in (tools) -> (Serial). After that, please click button (√) on the top left of IDE and compile the program. Burn the program to the board after compiling by clicking button (->);
  • Open serial monitor and set "\r\n " and "115200 baud "
  • The notice of successful WIFI connection will pop up at first.
  • Enter AT instruction in the serial port and it will return "OK".
  • Enter website such as baidu.com in the serial port and it will return webpage data.
Serial
  • Enter fixed instructions in the serial monitor and you'll see returned result, which can refer to common AT Instruction part.

Such as:

  • AT+GMR
  • AT+CIFSR
  • AT+CIPSTATUS
AT
  • IDE tests program
You can adopt HTTPGET program of _03_microduino_WiFi_ESP8266 from Microduino IDE example for testing.
ESP8266-exampleCode.jpg

Change your WIFI password in the code where there are SSID(WIFI name) and password setting.

  • Download program
    • Stack Microduino-WiFi(ESP) with Microduino-Core+ and Microduino-USBttl, plug USB cable into mCookie-CoreUSB on one side and connect computer USB socket on the other side. Then, start Arduino IDE, copy the program above to IDE, select Microduino-CoreUSB in (tools) -> (Board) and choose the right serial number in (tools) -> (Serial). After that, please click button (√) on the top left of IDE and compile the program. Burn the program to the board after compiliing by clicking button (->)
  • Open serial monitor and set "\r\n " and "115200 baud "
  • Firstly, you'll see notice of successful WIFI connection.
  • If you see content description, it means you have visited "www.baidu.com".
    Serial
  • Pin Description
mCookie-WiFi


mCookie-WiFi


Project

Related Projects: WiFi Weatherstation

F&Q

Picture

MCookie-WiFi-t1.jpg
MCookie-WiFi-b1.jpg
mCookie-BT Front
mCookie-BT Back