Difference between revisions of "Microduino-Module nRF"

From Microduino Wiki
Jump to: navigation, search
Line 35: Line 35:
:[[file:Micrduino-nRF24-1.jpg|800px|thumb|center|Microduino-nRF24 Spec]]
:[[file:Micrduino-nRF24-1.jpg|800px|thumb|center|Microduino-nRF24 Spec]]
<br style="clear: left"/>
<br style="clear: left"/>
:[[file:Micrduino-nRF24-2.jpg|800px|thumb|center|Microduino-nRF24 Spec]]
<br style="clear: left"/>

Revision as of 15:01, 22 January 2014


Microduino-nRF24 uses the newest 2.4GHz transceiver nRF24L01 from Nordic Semiconductor. This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the nRF2401A and add some extra pipelines, buffers, and an auto-retransmit feature.

Designers can use Microduino-nRF24 in project without any wireless design , and just need to stack it with Microduino-Core or Microduino-Core+ through UPin-27, the standard Microduino interface will attach nRF24 and MCU with SPI bus, on transferring data.

Microduino-nRF24 works in the 1.9 to 3.6v voltage, the on-chip DC-DC regulator will automatically step down supply voltage to proper level.

Note: We now populate these boards with the nRF24L01+. The '+' version of the IC has improved range, sensitivity, and data rates. The command set is backward compatible with the original nRF24L01.


  • Worldwide license-free 2.4GHz ISM band operation
  • Using the U-Shape 27-pin interface (UPin-27), the standard interface of Microduino
  • Delivered ready to plug in.
  • 2.54mm (0.1 inch) pin pitch, compatible to bread board and hole board


  • Auto Acknowledge
  • Auto Re-Transmit
  • 100m Range at 250kbps
  • 250kbps to 2Mbit Data Rate
  • 32 Byte separate TX and RX FIFOs
  • Software selectable channel from 2400MHz to 2525MHz (125 Selectable channels)
  • 1Mbps and 2Mbps on-air data-rate
  • Enhanced ShockBurst? hardware protocol accelerator
Microduino-nRF24 Spec


Microduino-nRF24 Schematic

Microduino-nRF24 PCB





Microduino nRF24 Front
Microduino nRF24 Back