Microduino-Sensorhub

From Microduino Wiki
Revision as of 06:57, 29 January 2016 by Admin (talk) (Specification)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Language: English  • 中文
Microduino- Sensorhub -rect.jpg

Microduino-Sensorhub is designed for Microduino Sensor Series, which is easy for connection between sensors and core modules.






Features

  • With twelve sensor interfaces integrated on the base of the UPIN27 board.
  • Small, stackable and Arduino compatible.

Specification

  • Contain digit interface, analog interface, IIC interface and the serial port.
  • Rules of sensor interface: GND, VCC, signal 1 and signal 2.
  • Two IIC interfaces
  • Pin Description:
SENSORHUBtips.jpg


  • Electric Level of the Pin:
    • The default level of the IIC interface is 3.3V and that of the other IO ports is 5V.
    • You can adjust the connection of the jumper wires to change the level of the other IO ports if there is the need.
Sensorjump.jpg

Document

Development

  • Stacked with Microdduino core module with Microduino sensors connected outside. Choose different interface according to various sensors.


Application

Purchase

History

Image

Video