Difference between revisions of "Microduino-Shield Duo-H"

From Microduino Wiki
Jump to: navigation, search
(Specifications)
Line 14: Line 14:
  
 
==Specifications==
 
==Specifications==
*3.3V regulator;
+
*3.3V regulator.
*Onboard power supply (5V, 3.3V) and indicator;
+
*Onboard power supply indicator(5V, 3.3V).
*Reset button on board;
+
*Onboard reset button.
*MicUSB power supply;
+
*MicUSB power supply.
*Two Microduino UPIN27 seat Interconnects and horizontal arrangement on the board.
+
*Two Microduino UPIN27 seats interconnect on the board, arranged horizontally.  
  
 
[[File:Duo-h-Pinout-2.jpg|800px|thumb|center|Microduino-Duo-h-Pinout]]
 
[[File:Duo-h-Pinout-2.jpg|800px|thumb|center|Microduino-Duo-h-Pinout]]

Revision as of 06:43, 22 December 2015

Language: English  • 中文
Microduino-Duo-h

Microduino-Duo-h is a horizontal extension board for Microduino other module.

Features

  • Pin compatible with Arduino uno;
    • 2.54 pitch Female Heade is Microduino module based, the same name of the pins are connected to each other in the board, each pin is installed with the power and ground to facilitate debugging;
  • Define unified interface Microduino specification and contain rich peripheral modules. Set up the quick connection with other Microduino modules and sensors easily and flexibly;
  • Two Female Heade's each pin interconnects and horizontal arrangement on the board which can reduce the overlay height;

Specifications

  • 3.3V regulator.
  • Onboard power supply indicator(5V, 3.3V).
  • Onboard reset button.
  • MicUSB power supply.
  • Two Microduino UPIN27 seats interconnect on the board, arranged horizontally.
Microduino-Duo-h-Pinout

Document

Development

Set up the quick connection with other Microduino modules and sensors easily and flexibly.

Application

Overlay arbitrary Microduino module to compose different system, and reduce the height.

Pictures

Microduino Duo-h Front
Microduino Duo-h Back