Difference between revisions of "Microduino-Shield Duo-V"

From Microduino Wiki
Jump to: navigation, search
Line 3: Line 3:
 
|
 
|
 
[[file:Microduino-Duo-V.jpg|400px|thumb|right|Microduino-Duo-V]]
 
[[file:Microduino-Duo-V.jpg|400px|thumb|right|Microduino-Duo-V]]
Microduino-Duo-V is a vertical extension board.
+
Microduino-Duo-V is a vertical extension board for Microduino other module.
  
 
|-
 
|-
 
|
 
|
==特色==
+
==Features==
*兼容Arduino uno针脚;
+
*Pin compatible with Arduino uno;
*2.54间距的排母为Microduino模块提供底座,同一名字的引脚都相互连接在该板,调试方便;
+
**2.54 pitch Female Heade is Microduino module based, the same name of the pins are connected to each other in the board, each pin is installed with the power and ground to facilitate debugging;
*统一的 Microduino 接口规范,和丰富的外围模块,可方便、灵活的与其他符合 Microduino 接口规范的模块、传感器进行快速的连接和扩展;
+
*Define unified interface Microduino specification and contain rich peripheral modules. Set up the quick connection with other Microduino modules and sensors easily and flexibly;
*两个底座每个引脚互连在该板上纵向排列,可降低叠加高度;
+
*Two Female Heade's each pin interconnects on the board which can reduce the overlay height;
  
 
==Specifications==
 
==Specifications==
*3V3稳压;
+
*3.3V regulator;
*板载电源(5V、3.3V)指示灯;
+
*Onboard power supply (5V, 3.3V) and indicator;
*板载复位按键;
+
*Reset button on board;
*MicUSB供电;
+
*MicUSB power supply;
*两个Microduino UPIN27座互连在该板上纵向排列。
+
*Two Microduino UPIN27 seat Interconnects and vertical arrangement on the board.
  
 
[[File:Duo-v-Pinout-1.jpg|800px|thumb|center|Microduino-Duo-v-Pinout]]
 
[[File:Duo-v-Pinout-1.jpg|800px|thumb|center|Microduino-Duo-v-Pinout]]
  
==文档==
+
==Document==
  
==开发==
+
==Development==
与其他符合 Microduino 接口规范的模块、传感器进行快速的连接和扩展实现特定功能。
+
Set up the quick connection with other Microduino modules and sensors easily and flexibly.
==应用==
+
==Application==
任意Microduino模块叠加组成不同的系统,可降低高度。
+
Overlay arbitrary Microduino module to compose different system, and reduce the height.
  
 
==Pictures==
 
==Pictures==

Revision as of 08:56, 3 February 2014

Microduino-Duo-V

Microduino-Duo-V is a vertical extension board for Microduino other module.

Features

  • Pin compatible with Arduino uno;
    • 2.54 pitch Female Heade is Microduino module based, the same name of the pins are connected to each other in the board, each pin is installed with the power and ground to facilitate debugging;
  • Define unified interface Microduino specification and contain rich peripheral modules. Set up the quick connection with other Microduino modules and sensors easily and flexibly;
  • Two Female Heade's each pin interconnects on the board which can reduce the overlay height;

Specifications

  • 3.3V regulator;
  • Onboard power supply (5V, 3.3V) and indicator;
  • Reset button on board;
  • MicUSB power supply;
  • Two Microduino UPIN27 seat Interconnects and vertical arrangement on the board.
Microduino-Duo-v-Pinout

Document

Development

Set up the quick connection with other Microduino modules and sensors easily and flexibly.

Application

Overlay arbitrary Microduino module to compose different system, and reduce the height.

Pictures

Microduino Duo-v Front
Microduino Duo-v Back