Microduino GPS recorder-306KIT

From Microduino Wiki
Revision as of 15:22, 2 March 2014 by Pkj (talk)
Jump to: navigation, search
Language: English  • 中文

Outline

Project:Microduino GPS Recorder

Objective:Use the Microduino GPS module to get the geographic Information and store into Microduino SD card.

Difficulty:Elementary

Time-consuming:2 hours

Maker:Microduino Studio-YLB

Bill of Materials

  • Microduino module:(MICRODUINO 203KIT)
Module Number Function
Microduino-Core+ 1 Core module
Microduino-FT232R 1 Download program
Microduino-NEO-6M 1 WiFi module
Microduino-SD 1 Store information
Microduino-OLED 1 Display information
306KIT picture

Document

Debug

Step 1:Set up hardware

Stack all the modules, and put the GPS antenna to outside, or may not receive the signal.

306KIT
306KIT

Step 2:Download program If use the default jumper (RX0、TX1), need unplug the Microduino NEO-6M when download program;

Step 3:Test Find an open area to test, can't in the room, because no signal is received. The current status of the module can be judged by the PPS indicator: lighting, indicates that the module has started to work, but hasn't achieved position informaton. Flashing (100ms off, 900ms bright), which means that the module has been successful positioning.

Result

After get the position information, the parameters can be seen, and these data can be recorded into the memory card.

  • Walking speed
  • Latitude and longitude
  • Signal strength
  • The number of satellite
  • Altitude

Note

Video

http://v.youku.com/v_show/id_XNjY1NzE3NDQ0.html