Microduino Rotary encoder chooses the mobile number and sends message

From Microduino Wiki
Revision as of 09:30, 12 September 2016 by Fengfeng (talk)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Language: English  • 中文

Outline

  • Project: Microduino GPRS_GSM Encoder chooses the number and sends text message
  • Objective: Microduino GPRS/GSM module plug in the SIM card and follow some simple instructions to make Microduino core board connected to the internet, the send and receive messages. Today we will use the encoder to simulate the mobile and then choose the time to enter the number, then sends the specified message.
  • Difficulty: High
  • Time-consuming: 3 hours
  • Maker: Microduino Studio-PKJ

Bill of Materials

  • Microduino equipment
Module Number Function
Microduino-Core 1 Core module
Microduino-FT232R 1 Download program
Microduino-GPRS/GSM 1 Send text message
  • Other equipment
Rotary encoder control board 1 Select the number and send the message
Lithium battery 1 Power the Microduino GPRS/GSM module
SIM card 1 Send message
USB cable 1 Power the core module

Document

Download OLED library: https://codeload.github.com/stanleyhuangyc/MultiLCD/zip/master

Download test program: https://github.com/Microduino/Microduino_Tutorials/tree/master/Microduino_Advanced_Tutorial/Microduino_GSM_SMG

Debug

  • Prepare work:
  • Download OLED library, copy the file under MultiLCD\MultiLCD directory to MultiLCD folder, then delete other no used files. Unzip the library to libraries folder of IDE.
  • Step 1:

Set up system, as follows:

GPRS GSM setup.jpg
  • Step 2:

Open the test program, compile it and then download.

GPRS GSM download.jpg
  • Step 3:

After download, use the encoder to choose the mobile phone number.

GPRS GSM ok.jpg
  • Confirmed the mobile phone number, then choose Y to send message "Hello! Microduino". You can change the sentence "#define text "Hello! Microduino" to redefine the message that you want to send.

Program description

1.Read the I/O port voltage to judge if the encoder was pressed, which used to choose the number;

2.Use the interrupt 0 and 1 to judge the direction of encoder, which used to choose the value;

3. oled_draw() is the interface select function;

4. SMS_sms() function uses the AT command to send message.

Result

Use the encoder to choose number and send message, avoid the use of matrix keyboard.

Pay attention issue

Copy the files under MultiLCD\MultiLCD directory in OLED library, then compile the test program.

Video

http://v.youku.com/v_show/id_XNjk5NzkyNjYw.html