Mixly Block Category - SerialPort

From Microduino Wiki
Revision as of 00:46, 22 February 2017 by Sonny (talk)
Jump to: navigation, search

Serial is used for communication between the Microduino / Arduino board and a computer or other devices. All Microduino / Arduino boards have at least one serial port (also known as a UART or USART): Serial. It communicates on digital pins 0 (RX) and 1 (TX) as well as with the computer via USB. Thus, if you use these functions, you cannot also use pins 0 and 1 for digital input or output.


Read more here: https://www.arduino.cc/en/Reference/Serial

Serial Baud Rate

Sets the data rate in bits per second (baud) for serial data transmission. For communicating with the computer, use one of these rates: 300, 600, 1200, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600, or 115200.


Read more here: https://www.arduino.cc/en/serial/begin

Serial Write

Serial Print

Serial PrintLn

Serial PrintLn(Hex)

Serial Availability

Serial Read String

Serial Read String Until Character Delimitation

Serial Read

  • read
  • peek
  • parseInt
  • paraseFloat

Serial Flush

Software Serial Setup