Motion (use with mDesigner)

From Microduino Wiki
Revision as of 21:56, 28 June 2018 by Sonny (talk | contribs)
Jump to: navigation, search

The motion sensor is a 3-axis gyroscope and 3-axis accelerometer. It is capable of detecting the angle and angular rate in the yaw, pitch, and roll axes (aircraft principal axes). Support for this module is found in mDesigner.

Note: This module has a similar name to a Microduino / mCookie Motion module. But they are NOT the same modules.
mDesigner does not support the Microduino / mCookie Motion module.