Difference between revisions of "Multi Color LED (use with mDesigner)"
From Microduino Wiki
(Created page with "The Multi Color LED is a light producing trinket which consist of 3 tiny LEDs of different color (red, green, and blue). Each color can be set to different brightness levels....") |
|||
Line 1: | Line 1: | ||
− | The Multi Color LED is a light producing trinket which consist of 3 tiny LEDs of different | + | The Multi Color LED is a light producing trinket which consist of 3 tiny LEDs of different colors (red, green, and blue). Each color can be set to different brightness levels. Combinations of various brightness levels for these colors can produce a wide variety of colors when mixed. Support for this trinket is found in mDesigner. |
=Compatible Pins= | =Compatible Pins= |
Revision as of 17:11, 5 June 2018
The Multi Color LED is a light producing trinket which consist of 3 tiny LEDs of different colors (red, green, and blue). Each color can be set to different brightness levels. Combinations of various brightness levels for these colors can produce a wide variety of colors when mixed. Support for this trinket is found in mDesigner.
Compatible Pins
The following pins on the Hub or mCenter+'s Hub support this module:
Pin Name | Compatibility | Notes |
---|---|---|
Pin 0 | Yes | Not recommended, Pin 0 & 1 used by mDesigner (serial communication). |
Pin 1 | Yes | Not recommended, Pin 0 & 1 used by mDesigner (serial communication). |
Pin 2 | Yes | |
Pin 3 | Yes | |
Pin 4 | Yes | |
Pin 5 | Yes | |
Pin 6 | Yes | |
Pin 7 | Yes | |
Pin 8 | Yes | |
Pin 9 | Yes | |
Pin 10 | Yes | |
Pin 11 | Yes | |
Pin 12 | Yes | |
Pin 13 | Yes | |
Pin A0 | Yes | |
Pin A1 | Yes | |
Pin A2 | Yes | |
Pin A3 | Yes | |
Pin A6 | Yes | |
Pin A7 | Yes | |
Pin I2C | No |