OLED (use with mDesigner)

From Microduino Wiki
Revision as of 19:57, 12 July 2018 by Sonny (talk | contribs) (Method 1: Stacking)
Jump to: navigation, search

The organic light-emitting diode (OLED) module is a display module capable of displaying information, shapes, images, etc on its 0.96-inch 128x64 (pixel) screen. Support for this trinket is found in mDesigner.

Connectivity

The OLED module can be connected to a project in two ways. Either stacking or connecting to a sensor hub using a wire.

Method 1: Stacking

Stack directly onto an mBattery or mCenter+.

OLED Connectivity Stacked.png


Method 2: Connecting with Wire

Connecting the OLED screen to a sensor hub with a wire allows for the OLED to be positioned in different locations.
The following pins on the Hub or mCenter+'s Hub support this module:

OLED Connectivity Wired.png
Pin Name Compatibility Notes
Pin 0 No
Pin 1 No
Pin 2 No
Pin 3 No
Pin 4 No
Pin 5 No
Pin 6 No
Pin 7 No
Pin 8 No
Pin 9 No
Pin 10 No
Pin 11 No
Pin 12 No
Pin 13 No
Pin A0 No
Pin A1 No
Pin A2 No
Pin A3 No
Pin A6 No
Pin A7 No
Pin I2C Yes Any I2C / IIC pin.