Selecting board, processor, and port

From Microduino Wiki
Revision as of 17:32, 28 December 2016 by Sonny (talk) (Created page with "In order to upload programs onto Core modules, the correct board, processor and port needs to be selected. =Selecting the Board and Processor= =Selecting the Port= Port...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

In order to upload programs onto Core modules, the correct board, processor and port needs to be selected.

Selecting the Board and Processor

Selecting the Port

Port selection is dependent on which programmer is connected. But it is usually the only select-able port in the list.

If there is no select-able port ensure that:

  • the hardware connections are secure and correct
  • the drivers are installed.