Sensor-Color LED

From Microduino Wiki
Revision as of 08:28, 22 October 2015 by (talk) (Created page with "{{Language|Microduino-Color LED}} {| style="width: 800px;" |- | 400px|thumb|right| Microduino-Lantern Microduino-Color LED is one-wire-bu...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Language: English  • 中文

Microduino-Color LED is one-wire-bus-control colored LED light, adopting WS2811 protocol with built-in IC chip control.


  • One-wire bus control and one I/O port control needed;
  • Built-in IC control, capable of cascade control;
  • Free color control (0-225);


  • 3.3V~5V operation voltage;
  • Size: 5mm*5mm
  • 1.27mm-pitch and 4pin interface;
  • Three basic color to combine different color by adjusting from 0 to 255;



You can select the color of the LED light by checking the corresponding color code online. Some are hexadecimal code value, which can be transferred to decimal value.


  • Stack all modules and connect the “IN” on the back of WS2812 to a digital port (D6) of Sensorhub via dupont line.
  • Open “strandtext” in the library and change the “60” of “Adafruit_NeoPixel strip = Adafruit_NeoPixel(60, PIN, NEO_GRB + NEO_KHZ800)” to “1”, which is the light number you want to control. Here we adopt D6 pin, which you can also change.
  • Choose the right board after changing and then download after compiling.
  • You can see cool color experience after the download.




  • Front
Microduino-Cube-Station Front
  • Back
Microduino-Cube-Station Back