Difference between revisions of "Sensor-Crash"

From Microduino Wiki
Jump to: navigation, search
(Programming)
(Development)
Line 57: Line 57:
 
*Select the '''[[Selecting_board,_processor,_and_port|board, processor and board]]'''.
 
*Select the '''[[Selecting_board,_processor,_and_port|board, processor and board]]'''.
 
*Code:
 
*Code:
**Either, open the code file with the software (IDE)
+
**Either, open the code file with the software (IDE): '''[[File:Sensor_Crash_Test.zip]]'''
**Or copy and paste the code from the link into the software (IDE)
+
**Or copy and paste the code into the software (IDE):  '''https://gist.github.com/anonymous/d714e491f22fda1c42dd78f9e92b5eb4'''
  
 
*Upload the code.
 
*Upload the code.

Revision as of 22:13, 30 March 2017

Language: English  • 中文
Microduino-Crash Sensor

The product number of Sensor-Crash is: MSDS11

Sensor-Crash is a crash sensor, which is used to detect whether a crash has happened, and it can be also named crash signal sensor.



Introduction of Sensor Pin

Sensor backpin.png

Crash Sensor
General Pin Out Sensor / Trinket's Pin Out
PIN1 (GND) GND
PIN2 (VCC) VCC
PIN3 (SIGNAL-A) Digital Input
PIN4 (SIGNAL-B) Not Connected
  • General Pin Out is the standard pin out of a Sensor / Trinket connector.
  • Sensor / Trinket's Pin Out is this specific Sensor / Trinket's wiring in relation to the General Pin Out.
  • SIGNAL-A / SIGNAL-B are signals that could be digital input, digital output, analog input or analog output. Or special signals such as serial communication (SoftwareSerial, IIC (I2C), etc) or other special signals.
  • Not Connected refers to the Pin not being used for this particular Sensor / Trinket.
  • Read more about the hub module.

Features

  • With small size, which is easy to install;
  • It can be used as key switch and limit switch;
  • It feels gentle.

Specification

  • Sensor voltage
    • 3.3V~5V working voltage
  • Size of the sensor
    • Size of the board: 23.5mm*13mm
    • 1.27mm-spacing 4Pin interface connected with sensorhub.
    • CAD drawing of the sensor: File:Sensor CAD.zip
  • Function description
    • The static signal of the sensor is HIGH. After being pressed, the signal changes into LOW.
  • Connection
    • This sensor can be connected to the following interfaces of the core: D2~D13,A0~A7

Document

Development

Program Download

Programming

  • Follow the Software Getting Started Guide.
  • Select the Board, Processor and Port.
  • Click [File]->[Open], browse to the project program address, and click "Sensor_Crash_Test.ino" to open the program.
  • After confirming all these items are correct, click "→" to download the program to the development board.
  • Upload the code.

Hardware Setup

  • Referring to the following diagram, connect the Sensor-Crash to digital port D6 of Microduino-Sensorhub.


Microduino-sensorhub Crash.JPG


Result

  • After download, open the serial monitor.
  • The static sensor signal is HIGH. After being pressed, it changes into LOW.

Application

  • Key switch
  • Limit switch

Projects

History

Gallery

File:MicroduinoCrash-F.JPG
mCookie-Crash-Front
File:Microduino-Crash-b.JPG
mCookie-Crash-Back
Retrieved from "https://wiki.microduinoinc.com/index.php?title=Sensor-Crash&oldid=12512"