Sensor-IR Emitter

From Microduino Wiki
Revision as of 05:24, 22 July 2016 by Fengfeng (talk) (Fengfeng moved page Microduino-IR Emitter to Sensor-IR Emitter)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Language: English  • 中文
Microduino-IR-transmitter

Microduino-IR Emitter(Transmitter) is an infrared emission sensor.


Features

  • Low power and high sensitivity;


Specification

  • Electrical specification
    • 3.3V~5V operation voltage;
    • Output device
  • Tech parameters
    • Infrared spectrum 1~3 µm
  • Size
    • Size of the LED light: 5mm*5mm,
    • Size of the board: 20mm*20mm
    • 1.27mm-pitch 4PIN interface
  • Connection method
    • Pin description: GND, VCC, signal output and NC(empty). Since the output signal is digital, it needs to be driven by PWM digital interface. It can be connected to the pins (6) of the Sensorhub with the corresponding D6 pin .

Document


Development

Preparation

Program

  • Open " IRsendDemo " program in the libraries.
MCookie-IRsendDemo.JPG
  • include <IRremote.h> Use infrared library function
  • IRsend irsend; Define infrared receiving object
  • irsend.sendSony(0xa90, 12); Send infrared code

Hardware Buildup

  • Stack all modules together, then use dupont lines to connect the interface on the back of the IR-Emitter with the D3 digital port of the Sensorhub.

Microduino-Sensorhub

Microduino-sensorhub D3.PNG

mCookie-Hub

MCookie-sensorhub D3.PNG
  • Connect the core, Sensorhub and theLED to a computer with a USB cable.
Upload.JPG
  • Open Arduino IDE, select File→Examples→Microcuino→Sensor_IRremote→IRsendDemo program examples, choose the right board from Tools→Board and then compile.
  • Select the right port from Tools→Serial Port in Arduino IDE after compiling, then download program.
  • After download, you can open the serial monitor. Input any values at the console and you'll see the LED on the IR-Emitter blinks once, meaning the infrared signal has been sent.

Application

Microduino-IR-Emitter can be used for infrared remote control and is suitable for all kinds of home appliances control. You need to make sure the infrared signal type and protocol format before using.


Project

Purchase

History

Pictures

  • Front
Microduino-IR-transmitter Front
  • Back
Microduino-IR-transmitter Back