Difference between revisions of "Sensor-Shake"

From Microduino Wiki
Jump to: navigation, search
(Introduction of Sensor Pin)
 
Line 12: Line 12:
  
 
==Introduction of Sensor Pin==
 
==Introduction of Sensor Pin==
{{Sensor_explain
+
{{ST_Pinout
|nameA=[[Sensor-Shake]]
+
|st_name=Shake Sensor
|modeA=Digital signal input
+
|pin3=Digital Input
|modeB=NC
 
 
}}
 
}}
  

Latest revision as of 22:47, 30 March 2017

Language: English  • 中文
Microduino-Shake

The product number of Sensor-Shake is: MSDS51

Sensor-Shake is a shake detection sensor module.

Shake sensor is for detect the mechanical vibration quantity of objects.

Introduction of Sensor Pin

Sensor backpin.png

Shake Sensor
General Pin Out Sensor / Trinket's Pin Out
PIN1 (GND) GND
PIN2 (VCC) VCC
PIN3 (SIGNAL-A) Digital Input
PIN4 (SIGNAL-B) Not Connected
  • General Pin Out is the standard pin out of a Sensor / Trinket connector.
  • Sensor / Trinket's Pin Out is this specific Sensor / Trinket's wiring in relation to the General Pin Out.
  • SIGNAL-A / SIGNAL-B are signals that could be digital input, digital output, analog input or analog output. Or special signals such as serial communication (SoftwareSerial, IIC (I2C), etc) or other special signals.
  • Not Connected refers to the Pin not being used for this particular Sensor / Trinket.
  • Read more about the hub module.

Features

  • With small size which is easy to install;
  • With good detection sensitivity;
  • With adjustable detection sensitivity.

Specification

  • Sensor voltage
    • 3.3V~5V working voltage
  • Size of the sensor
    • Size of the board: 23.5mm*13mm
    • 1.27mm-spacing 4Pin interface connected with sensorhub
    • CAD drawing of the sensor: File:Sensor CAD.zip
  • Function description
    • The static signal of the sensor is LOW. When the shake occurs, the sensor will produce signal HIGH.
  • Connection
    • This sensor can be connected to the following interfaces of the core: D2~D13, A0~A7

Documents

Development

Program Download

Programming

  • Follow the Software Getting Started Guide.
  • Select the Board, Processor and Port.
  • Click [File]->[Open], browse to the project program address, and click "Sensor_Shake_Test.ino" to open the program.
  • After confirming all these items are correct, click "→" to download the program to the development board.

Hardware Setup

  • Referring to the following diagram, connect the Sensor-Shake to the digital port D6 of Microduino-Sensorhub.


Microduino-sensorhub Shake.JPG


Result

  • After download, open the serial monitor.
  • The static signal of the sensor is LOW. When the shake occurs, the sensor will produce HIGH signal.

Application

  • Shake detection

Project

History

Gallery

File:MicroduinoShake-F.JPG
mCookie-Shake-Front
File:Microduino-Shake-b.JPG
mCookie-Shake-Back
Retrieved from "https://wiki.microduinoinc.com/index.php?title=Sensor-Shake&oldid=12678"