Setup Guide on Mac OS X

From Microduino Wiki
Revision as of 08:48, 24 April 2014 by Southwolf (talk)
Jump to: navigation, search

Equipment

  • Software:

Microduino software develop environment Arduino IDE, Microduino IDE configure pagckage;

  • Hardware:

Microduino FT232R、Micro-USB cable;

Congfigure procedure

  • Download Arduino IDE

http://arduino.cc/en/Main/Software

Arduino IDE for Mac


  • Uncompress the Arduino IDE package to Applications folder;
  • Connect the Microduino FT323R to PC with the Micro-USB cable;
  • After the new hardware was recognized, then will search the driver in system. If con't find the driver, need install it manually.
  • Click the right button on "computer", then click "manager".
Microduino
  • Then open the "Device Manager", you can see the uncognized hardward with a exclamation.
Microduino
  • Click right button on un-recognized hardware, select update driver software. In the pop-up dialog, select search computer for driver software.
Microduino


  • Then select the drivers directory in Aduirno IDE directory.

Note, if your computer reports that can't find the driver, need to be further positioning to the directory \drivers\FTDI USB Drivers

Microduino
  • Click next, then install the driver.
Microduino
Microduino
  • After the driver installed successfully, you can see the COM port.
Microduino



Please refer to: File:Mac microduino.pdf