Stepper Motor Control

Objective The course will show you how to control stepper motor via "Processing". Equipment Microduino-Core Microduino-FT232R Microduino-A4982 Other Hardware Equipment A USB cable A pegboard A copper cylinder and a screw Welding tools Electric iron Tin solder Wire Tweezer Schematic Program https://github.com/Microduino/Microduino_Tutorials/tree/master/Microduino_Processing/MicroduinoStepperControl https://github.com/Microduino/Microduino_Tutorials/tree/master/Microduino_Processing/ProcessingStepperControl Debugging The hardware buildup is similar to that of the DC motor in the 38th advanced course: http://www.microduino.cc/wiki/index.php?title=%E7%AC%AC%E4%B8%89%E5%8D%81%E5%85%AB%E8%AF%BE--Microduino_%E6%AD%A5%E8%BF%9B%E7%94%B5%E6%9C%BA%E9%A9%B1%E5%8A%A8/zh Step 1: Cut pegboard with the right size; Step 2: Make sure a right base location and weld the circuit according to the schematic; 洞洞板焊法 正面 反面 Building the circuit ok Step 3: Here is the code needed: The code of the two ends (Processing and Microduino) Microduino: //Read serial data void loop() { if(Serial.available()) { command=Serial.read(); Serial.println(command); if(command=='l') {//The stepper motor turns left if the data sent from Processing is 'l' stepper.setSpeed(motorSpeed); stepper.runSpeed(); } else if(command=='r') {//The stepper motor turns right if the data sent from Processing is 'r' stepper.setSpeed(-motorSpeed); stepper.runSpeed(); } else { stepper.stop();//otherwise, it will stop turning } } } Processing: //Monitor the mouse during drawing function. void draw() { background(0); image(img,0,0); noFill(); if("left".equals(turning)) { rect(30,80,150,210); fill(0); //Specify font color text ( "turn left" ,250,20); port.write("l"); }else if("right".equals(turning)) { rect(320,90,150,200); fill(0); //Specify font color text ( "turn right" ,250,20); port.write("r"); } } //Move the mouse and judge if it it inside the selection area // When the mouse is moved, the state of the turning is toggled. void mouseMoved() { if (mouseX > 30 && mouseX < 180 && mouseY > 80 && mouseY < 290) { turning = "left"; cursor(HAND); } else if (mouseX > 320 && mouseX < 470 && mouseY > 90 && mouseY < 290) { turning = "right"; cursor(HAND); } else { turning = "turning"; cursor(ARROW); } } Step 4: Download the code and get it compiled successfully. Step 5: Put the mouse on the "boy in the left" and the "girl in the right" to see the response of the stepper motor after the system goes well. Result When putting the mouse on the "boy in the left": When putting the mouse on the "girl in the right": The stepper motor will turn in the appropriate direction Video