Difference between revisions of "Use the Microduino-USBTTL to burn bootloader for Microduino- CoreSTM32"
From Microduino Wiki
Line 1: | Line 1: | ||
*Download and instll STM32 flash bootloader demo: http://www.st.com/web/en/catalog/tools/PF257525 | *Download and instll STM32 flash bootloader demo: http://www.st.com/web/en/catalog/tools/PF257525 | ||
− | |||
*Stack the Microduino-CoreARM and Microduino-USBTTL module, then use the USB cable to connect the Microduino-USBTTL module and PC. (Note: not the Microduino-CoreARM module) | *Stack the Microduino-CoreARM and Microduino-USBTTL module, then use the USB cable to connect the Microduino-USBTTL module and PC. (Note: not the Microduino-CoreARM module) | ||
*Open the "Flash loader demonstrator", when you see following dialog, press the "BUT" button, then click the "reset" button, and then release the "BUT" button, click next. | *Open the "Flash loader demonstrator", when you see following dialog, press the "BUT" button, then click the "reset" button, and then release the "BUT" button, click next. |
Latest revision as of 01:42, 29 May 2016
- Download and instll STM32 flash bootloader demo: http://www.st.com/web/en/catalog/tools/PF257525
- Stack the Microduino-CoreARM and Microduino-USBTTL module, then use the USB cable to connect the Microduino-USBTTL module and PC. (Note: not the Microduino-CoreARM module)
- Open the "Flash loader demonstrator", when you see following dialog, press the "BUT" button, then click the "reset" button, and then release the "BUT" button, click next.
- Click next again
- Check the target is 128K and all pages are unprotected, click nexit
- Choose "download to device", search the "maple_mini_boot.bin", click next
- Wait for download finished, when Flash promts "Download finished", your Microduino-CoreSTM32 is ready to use!