Microduino Communication Modules

From Microduino Wiki
Jump to: navigation, search

Wired Communication

Microduino-W5500

  • Microduino Ethernet module
  • Support hardware TCP/IP protocol
  • Built-in 10BaseT/100BaseTX Ethernet PHY
  • Communicate with Core/Core+ through spi interface
  • UPin-27 standard interface
Microduino-W5500-rect.jpg

Microduino-ENC28J60

  • Main chip: ENC28J60
  • Microduino ethnet module
  • IEEE 802.3 compitable ethernet controller
  • integrate MAC and 10 BASE-T PHY, support POE
  • use SPI communication protocol
  • UPin-27: Microduino standard interface
Microduino-enc-rect.jpg

Microduino-RJ45

  • Main chip: ENC28J60
  • Microduino ethnet module
  • IEEE 802.3 compitable ethernet controller
  • integrate MAC and 10 BASE-T PHY, support POE
  • use SPI communication protocol
  • UPin-27: Microduino standard interface
Microduino-rj45-rect.jpg

Microduino-USBHOST

  • Microduino USB communication module
  • Support USB host controller and USB peripherals
  • UPin-27 Microduino standard interface
Microduino-USBHOST-rect.jpg

Microduino-RS485/zh

  • Microduino 485 bus serial communication module
  • Low power consumption, fast transmission rate and long transmission distance.
  • UPin-27 standard interface
Microduino-RS485-rect.jpg

Wireless Communication

Microduino-nRF24

  • Microduino 2.4G wireless module
  • use SPI communication protocol
  • Arduino library support
Microduino-nRF-rect.jpg

Microduino-smartRF

  • 470/950 MHz ISM/SRD band ultra low power wireless communication module
  • Use the SPI interface to communicate with Core/Core+ module
  • Have corresponding networking library support, can carry on a simple network
  • UPin-27 standard interface
Microduino smartRF-rect.jpg

Microduino-NFC

  • Two-way connection and identification of near-field communication module
  • Use IIC interface to communicate with Core/Core+ module
  • UPin-27 standard interface
Microduino-NFC-rect.jpg

Microduino-BT

  • Microduino Shield BT, two versions are provided: BT2.1 and BT4.0
  • support BT 2.1/4.0 protocol
  • use hardware serial or software serial ports (optional)
  • UPin-27: Microduino standard interface
Microduino-bt-rect.jpg

Microduino-Zigbee

  • Microduino-Zigbee
  • Adopt CC2530 chip
  • Low-power, low-rate and low-cost two-way wireless communication
  • UPin-27 standard interface
Microduino-zigbee-rect.jpg

Microduino-WiFi

  • Microduino WiFi Module
  • Base on TI CC3000 IEEE 802.11b/g solution
  • Use the SPI interface to communicate to Core module
  • UPin-27: Microduino standard interface
Microduino-cc3000-rect.jpg


Microduino-WIFI(ESP)

  • WIFI communication module
  • It can be connected to the Internet
  • Communicate data with CoreUSB by serial port
Microduino-8266-rect.jpg


Microduino-GPRS/GSM

  • Microduino GPRS/GSM module
  • Send, Receive short message
  • Access the network using SIM card
Microduino-GPRS-rect.jpg

Microduino-GPS

  • Microduino GPS Module
  • Core modules using UBLOX NEO-6M
  • Use serial to communicate with Core module
  • UPin-27: Microduino standard interface
Microduino-neo-6m-rect.jpg