Tft.println()

From Microduino Wiki
Jump to: navigation, search
tft.println(" ")
  • Effect:

Set the content of the text printed on the TFT screen.


  • Parameter:

Write the printed content in the quatation marks.


  • Example:
#define sclk 13
#define mosi 11
#define cs   5
#define dc   4
#define rst  -1  // you can also connect this to the Arduino reset

#include <Adafruit_GFX.h>    // Core graphics library
#include <Adafruit_ST7735.h> // Hardware-specific library
#include <SPI.h>

#if defined(__SAM3X8E__)
    #undef __FlashStringHelper::F(string_literal)
    #define F(string_literal) string_literal
#endif

Adafruit_ST7735 tft = Adafruit_ST7735(cs, dc, mosi, sclk, rst);

void setup(void) {
  tft.initR(INITR_BLACKTAB);   // initialize a ST7735S chip, black tab
  tft.fillScreen(ST7735_BLACK);
  tft.setCursor(10, 40);
  tft.setTextColor(ST7735_YELLOW);
  tft.setTextSize(0);
  tft.println("Microduino!");
}

void loop() {  }


[Return to TFT_ST7735 Syntax Manual]