View source for AM2312 Temp.& Hum Sensor

{| style="width: 800px;"
|-
|
=Function of the Modules=
*'''Reference：[[Temperature and humidity sensor]]'''
*The temperature range is -40-80℃, and it can’t be put into the water to test. 
==Outline==
Measure the temperature and humidity with the temperature and humidity sensor, and use the serial port monitor to print the tested data. 
==Bill of Materials==
*Module
{|class="wikitable"
|-
|Module||Number||Function
|-
|[[mCookie-CoreUSB]]||1||Core board
|-
|[[mCookie-Hub]||1||Sensor adapter
|-
|[[Microduino-Temp&Hum]]||1||Temperature and humidity sensor
|}

*Other Hardware Equipment
**USB cable   one piece
[[File:Temp-Hum.jpg|600px|center]]

==Building Hardware==
*Setup 1：Connect the temperature and humidity sensor with the IIC of Hub, and it can only be connected to the IIC.
[[file:mCookie-Temp&Hum-sensor.JPG|600px|center]]
*Setup 2：Connect CoreUSB, Hub, and the temperature and humidity together, and connect them to the computer with USB cable.
[[file:mCookie-Temp&Hum-pc.JPG|600px|center]]

==Mixly Programming==
*Step1：Because the serial port monitor is used, you need to find the serial port communication control in the communication.
[[File:mixly_Serial.jpg|400px|center]]
*Step2：The introduction of the serial port communication control
[[File:mixly_Serial_complian.jpg|600px|center]]
*Step3：Find the temperature and humidity module in Microduino sensors. 
[[File:mixly_intemp.jpg|600px|center]]
*The introduction of the temperature and humidity module.
[[File:mixly_digital-temp-in.jpg|600px|center]]
*If you want to print the content of the text that the custom defined, you can find it in the text.
 [[File:mixly_text.jpg|600px|center]]
*The introduction of the overall code
[[File:mixly_digital-temp-in-serial.jpg|800px|center]]

==Debugging==
*Step1：Choose the board card（Core USB 32U4） and  COM port（the default is automatic identification）correctly.
[[File:mixly_board_COM.jpg|400px|center]]
*Step2：Open the serial port monitor.
[[File:mixly_COMXX.jpg|400px|center]]
*Step3：Confirm that the serial port baud rate is consistent with the set.
[[File:mixly_COMXX_ok.jpg|400px|center]]
*Step4：Observe the data, and when you hold the sensor in hands, you can see that the temperature and the humidity will increase, and the humidity increases faster than the temperature.
[[File:mixly_COMXX_data—temp.jpg|400px|center]]