View source for Sensor-IO Split

{{Language|Sensor-IO split }}
{| style="width: 80%;"
|-
|

[[File: Microduino-IO-split.jpg|200px|thumb|right| Sensor-IO split]]


The product number of Sensor-IO Split is: '''MSDE21'''

Sensor-IO-split can split a 4PIN interface (sensor / trinket connector) into two separate connectors. This gives access to the second GPIO on the standard sensor / trinket header.

==Introduction of Pins==
{{ST_Pinout
|st_name=IO Split
|pin3=A
|pin4=B
}}



*All interfaces of Sensor-IO Split are '''4 pin JST 1.27mm pitch connectors / headers'''.

[[File: Microduino-IO-split_rule1.jpg|600px|center]]

After connecting the '''IN connector'''  to a header on the Sensor Hub. '''A interface''' corresponds to the '''even pins''' of header, and the '''B interface''' is corresponding to the '''odd pins''' header.

For example, connecting to the 6/7 pin of Hub, the corresponding pin of A is 6, and the corresponding pin of B is 7.

==Document==

*Schematic diagram: '''[[File: Sensor_IO-split.Zip]]'''

==Application==
It can be used to divide the two IO signals of one 4PIN port in Sensor Hub into two 4PIN ports. 


==Purchase==



==Gallery==
{| border="0" cellpadding="10" width="100%"
|-
|width="50%" valign="top" align="left"|
[[file: Sensor-IO split-F.JPG|thumb|400px|center|Sensor-IO split Front]]
|width="50%" valign="top" align="left"|
[[file: Sensor-IO split -b.JPG|thumb|400px|center|Sensor-IO split Back]]
|}
|}