Difference between revisions of "Microduino-Module Sensor Hub"

Microduino-Sensorhub is used to cooperate Microduino Sensor Series, to make it convenient that the sensors connect with the cores in Upin27, and extend the experiment.

Features

• Integrate 12 sensor interfaces.
• The size is small, and the sensor interfaces integrate on the Upin27 baseboard.

Specification

• Include digital, analog, serial port, IIC interfaces and so on；
• The specification of the sensors interfaces is ：GND, VCC, signal 1, and signal 2；
• Two IIC interface.

• Description of pins：

• Electrical level of pins：
  • The electrical level of IIC interface is 3.3V by default, and the one of other IO interfaces is 5V.
  • If there is a need, you can change the electrical level of other IO interfaces through adjusting the jumpers.

Documents

Development

• Stack it with Microduino core, and connect it with Microduino sensors externally. You can choose suitable interface according to different sensors.
  • For Microduino-OLED, you need to choose IIC interface；
  • For sensor Microduino-KEYBOARD , you need to use the analog interface；

Application

Purchase

History

Gallery

Video