Difference between revisions of "Sensor-Light-A1"

Microduino-Lightness

The product number of Sensor-Light-A1 is: MSDT42

Sensor-Light-A1 is a photosensitive brightness detection sensor module.

The light sensor transforms the light signal into electric signal with the photosensitive resistance. Its sensitive wavelength is near that of the visible light, including the infrared and the ultraviolet.

Description of the Sensor Pin

Pins of the sensor: PIN1: GND PIN2: VCC General signal pins: PIN3(IO1): digital/analog signal PIN4(IO2): NC(null) Special signal pins: If it is IIC: IO1/IO2 are respectively SDA/SCL. If it is soft serial port: IO1/IO2 are respectively tx/rx.

Special to Sensor-Light-A1 sensor pins PIN1: GND PIN2: VCC PIN3(IO1): Analog signal input PIN4(IO2): NC Microduino sensor can communicate with core module through the connection with Microduino-Module Sensor Hub.

Feature

• Resistance photosensitive element, with high sensitivity.

Specification

• Sensor voltage
  • 3.3V~5V working voltage

• Size of the sensor
  • Size of the board: 23.5mm*13mm;
  • 1.27mm-spacing 4Pin interface connected with sensorhub;
  • CAD drawing of the sensor: File:Sensor CAD.zip

• Function description
  • The sensor outputs the corresponding voltage according to the detected light intensity.

• Connection
  • This sensor can be connected to the following interfaces of core: A0~A7

Document

• Schematic diagram: File:Sensor-Light-A1.Zip.pdf
• Main sensor: File:Sensor-Light-A1 datasheet.pdf

Development

Program Download

• Download and unzip the program File:Sensor-Light-A1 Test.zip

Programming

• Follow the Software Getting Started Guide.
• Select the Board, Processor and Port.
• Click [File]->[Open], browse to the project program address, and click "Microduino_Light_A1.ino" to open the program.
• After confirming all these items are correct, click "→" to download the program to the development board.

Hardware Setup

• Referring to the following diagram, connect the Sensor-Light_A1 to the analog port A0/A1 of Microduino-Sensorhub.

Result

• After download, open the serial monitor.
• The value displayed on serial monitor reflects the current light intensity detected by the sensor.

Application

It can feel the intensity of light around us. It can be used to detect the light intensity, and control the indoor lighting and object shading and so on.

Project

• Uses of Light Sensor

Purchase

History

Gallery

• Front

• Back