Difference between revisions of "Microduino-Module nRF"

From Microduino Wiki
Jump to: navigation, search
(Specification)
 
(3 intermediate revisions by 2 users not shown)
Line 21: Line 21:
  
 
==Specification==
 
==Specification==
*Global open 2.4GHz ISM band with the maximum transmission power of 0DBM and
+
*Global open 2.4GHz ISM band with the maximum transmission power of 0DBM and free license to use.  
free license to use.  
 
 
*Low operation voltage: 1.9-3.6 V.  
 
*Low operation voltage: 1.9-3.6 V.  
 
*SMA antenna, easy to change.  
 
*SMA antenna, easy to change.  
Line 59: Line 58:
 
==Development==
 
==Development==
 
===Arduino library and support package===
 
===Arduino library and support package===
*Use RF24 library, refer to RF24 library file and RF24Network library file:
+
*Use RF24 library, refer to RF24 library file and RF24Network library file:
 
**https://github.com/Microduino/Microduino_Tutorials/tree/master/Microduino_Libraries/_03_Microduino_nRF_RF24
 
**https://github.com/Microduino/Microduino_Tutorials/tree/master/Microduino_Libraries/_03_Microduino_nRF_RF24
 
**https://github.com/Microduino/Microduino_Tutorials/tree/master/Microduino_Libraries/_03_Microduino_nRF_RF24Network
 
**https://github.com/Microduino/Microduino_Tutorials/tree/master/Microduino_Libraries/_03_Microduino_nRF_RF24Network
Line 71: Line 70:
 
*Prepared hardware:Microduino FT232R, Microduino Core*2, Microduino Nrf24*2;
 
*Prepared hardware:Microduino FT232R, Microduino Core*2, Microduino Nrf24*2;
 
*Prepared software:Microduino example program (Arduino part), Arduino IDE(1.0 release and upper), RF24 library, RF24Network library;
 
*Prepared software:Microduino example program (Arduino part), Arduino IDE(1.0 release and upper), RF24 library, RF24Network library;
*Copy the downlaoded library to libraries folod of Arduino IDE;
+
*Copy the downloaded library to libraries folod of Arduino IDE;
 
*Start Arduino IED, open Microduino example program, select board "Microduino Core (Atmega328P@16M,5V)", download directly;
 
*Start Arduino IED, open Microduino example program, select board "Microduino Core (Atmega328P@16M,5V)", download directly;
 
*The sending and receiving wiring picture:
 
*The sending and receiving wiring picture:

Latest revision as of 04:24, 4 August 2017

Language: English  • 中文
Microduino-nRF24

Microduino-nRF24 is a high-speed embedded wireless data transmission module.

Features

  • Fully integrated link layer on the module makes it easy to develop.
  • With automatic retransmission function, it can automatically detect and resend lost packets and the retransmission time and frequency can be controlled by software.
  • With packets that can automatically save un-received response signals.
  • With automatic reply function, the module can send response signal automatically after receiving valid data and need no reprogramming.
  • Capable of setting six receiving channels' address synchronously and opening the receiving channels selectively.
  • Standard pin 2.54mm spacing interface, making it convenient for embedded application.
  • Small, stackable and economic.
  • Open source hardware circuit design and Arduino compatible programming development environment.
  • With a uniform Microduino interface standard and rich peripheral modules, it can easily connect with other Microduino modules and sensors.
  • 2.54mm(0.1 inch) pin pitch, compatible with bread boards and pegboards.

Specification

  • Global open 2.4GHz ISM band with the maximum transmission power of 0DBM and free license to use.
  • Low operation voltage: 1.9-3.6 V.
  • SMA antenna, easy to change.
  • Support six channels' data transmission.
  • High rate: 2MBPS. Due to short transmission rate in the air, it largely reduces collision in wireless transmission. (Set 2MBPS or 256 KBPS, 1 MBPS air transmission rate with software)
  • Multi-point frequency: With 125 frequency points, it meets the requirement of multi-point communication and frequency hopping communication.
  • Low consumption: With fast air transmission and startup, it greatly reduces the current consumption when communicating in the response mode.

Pin Description

Microduino-nRF24 Spec


NRF24L01 Pin Microduino Pin Function
SCK D13 SPI bus clock
SI D12 Data input pin
SO D11 Data output pin
CSN D10 SPI Chip-select signal (Defined in program)
CE D9 RX or TX Mode selection (Defined in program)

Document

Eagle PCB File:Microduino-nRF24.zip


Main Components

Development

Arduino library and support package

Application

Download Program

Test Program:File:Program Test NRF.zip

Two Microduino core communicate via Nrf24

  • Prepared hardware:Microduino FT232R, Microduino Core*2, Microduino Nrf24*2;
  • Prepared software:Microduino example program (Arduino part), Arduino IDE(1.0 release and upper), RF24 library, RF24Network library;
  • Copy the downloaded library to libraries folod of Arduino IDE;
  • Start Arduino IED, open Microduino example program, select board "Microduino Core (Atmega328P@16M,5V)", download directly;
  • The sending and receiving wiring picture:
Sending wiring picture
Receiving wiring picture


  • Observation
    • Sending end can control receiving end's LED by button.
    • Sending end potentiometer can control the lightness of LED for receiving end.

FQA

  • Does this module have the antenna?
    • Yes.
  • Does this module support the voltage conversion from 5V to 3.3V?
    • Core and Core+ module doesn’t support this voltage conversion.
  • How to control this module running in low power consumption mode or close it directly?
    • You use the function pwerDwon() offered by Arduino library.
  • What's the work range of this module?
    • 100 meters in the open area.

Bug

History

Picture

Microduino nRF24 Front
Microduino nRF24 Back

Video