Difference between revisions of "Motion (use with mDesigner)"

From Microduino Wiki
Jump to: navigation, search
Line 3: Line 3:
 
|'''Note:'''<br>This module has a similar name to a '''Microduino / mCookie Motion''' module. They are NOT the same modules.<br>mDesigner does not support the '''Microduino / mCookie Motion''' module.
 
|'''Note:'''<br>This module has a similar name to a '''Microduino / mCookie Motion''' module. They are NOT the same modules.<br>mDesigner does not support the '''Microduino / mCookie Motion''' module.
 
|}
 
|}
 +
=Compatible Pins=
 +
The following pins on the '''Hub''' or '''mCenter+'s Hub''' support this module:
 +
<div style="width: 80%;">
 +
<div style="float: left;">[[File:Hub_I2C_Pins.png|thumb|600px]]</div>
 +
<div style="float: left;">
 +
{| class="wikitable" style="text-align: left;"
 +
|-
 +
! scope="col"| Pin Name
 +
! scope="col"| Compatibility
 +
! scope="col"| Notes
 +
|-
 +
| '''Pin 0'''
 +
| style='background: #FEF9E7' | Yes
 +
| Not recommended, Pin 0 & 1 used by mDesigner (serial communication).
 +
|-
 +
| '''Pin 1'''
 +
| style='background: #FEF9E7' | Yes
 +
| Not recommended, Pin 0 & 1 used by mDesigner (serial communication).
 +
|-
 +
| '''Pin 2'''
 +
| style='background: #EAFAF1' | Yes
 +
|
 +
|-
 +
| '''Pin 3'''
 +
| style='background: #EAFAF1' | Yes
 +
|
 +
|-
 +
| '''Pin 4'''
 +
| style='background: #EAFAF1' | Yes
 +
|
 +
|-
 +
| '''Pin 5'''
 +
| style='background: #EAFAF1' | Yes
 +
|
 +
|-
 +
| '''Pin 6'''
 +
| style='background: #EAFAF1' | Yes
 +
|
 +
|-
 +
| '''Pin 7'''
 +
| style='background: #EAFAF1' | Yes
 +
|
 +
|-
 +
| '''Pin 8'''
 +
| style='background: #EAFAF1' | Yes
 +
|
 +
|-
 +
| '''Pin 9'''
 +
| style='background: #EAFAF1' | Yes
 +
|
 +
|-
 +
| '''Pin 10'''
 +
| style='background: #EAFAF1' | Yes
 +
|
 +
|-
 +
| '''Pin 11'''
 +
| style='background: #EAFAF1' | Yes
 +
|
 +
|-
 +
| '''Pin 12'''
 +
| style='background: #EAFAF1' | Yes
 +
|
 +
|-
 +
| '''Pin 13'''
 +
| style='background: #EAFAF1' | Yes
 +
|
 +
|-
 +
| '''Pin A0'''
 +
| style='background: #EAFAF1' | Yes
 +
|
 +
|-
 +
| '''Pin A1'''
 +
| style='background: #EAFAF1' | Yes
 +
|
 +
|-
 +
| '''Pin A2'''
 +
| style='background: #EAFAF1' | Yes
 +
|
 +
|-
 +
| '''Pin A3'''
 +
| style='background: #EAFAF1' | Yes
 +
|
 +
|-
 +
| '''Pin A6'''
 +
| style='background: #EAFAF1' | Yes
 +
|
 +
|-
 +
| '''Pin A7'''
 +
| style='background: #EAFAF1' | Yes
 +
|
 +
|-
 +
| '''Pin I2C'''
 +
| style='background: #FDEDEC' | No
 +
|
 +
|}
 +
 +
</div>
 +
<br style="clear: left;" />
 +
</div>

Revision as of 22:01, 28 June 2018

The motion sensor is a 3-axis gyroscope and 3-axis accelerometer. It is capable of detecting the angle and angular rate in the yaw, pitch, and roll axes (aircraft principal axes). Support for this module is found in mDesigner.

Note:
This module has a similar name to a Microduino / mCookie Motion module. They are NOT the same modules.
mDesigner does not support the Microduino / mCookie Motion module.

Compatible Pins

The following pins on the Hub or mCenter+'s Hub support this module:

Hub I2C Pins.png
Pin Name Compatibility Notes
Pin 0 Yes Not recommended, Pin 0 & 1 used by mDesigner (serial communication).
Pin 1 Yes Not recommended, Pin 0 & 1 used by mDesigner (serial communication).
Pin 2 Yes
Pin 3 Yes
Pin 4 Yes
Pin 5 Yes
Pin 6 Yes
Pin 7 Yes
Pin 8 Yes
Pin 9 Yes
Pin 10 Yes
Pin 11 Yes
Pin 12 Yes
Pin 13 Yes
Pin A0 Yes
Pin A1 Yes
Pin A2 Yes
Pin A3 Yes
Pin A6 Yes
Pin A7 Yes
Pin I2C No


Retrieved from "https://wiki.microduinoinc.com/index.php?title=Motion_(use_with_mDesigner)&oldid=22378"