Difference between revisions of "Core STM32 Startup Guide"

From Microduino Wiki
Jump to: navigation, search
(Created page with "{| style="width: 800px;" |- | =Setup Microduino-CoreARM with Maple IDE (Windows)= * Download Maple IDE on http://leaflabs.com/docs/maple-ide-install.html#maple-ide-instal...")
 
Line 2: Line 2:
 
|-
 
|-
 
|
 
|
=Setup Microduino-CoreARM with Maple IDE (Windows)=
+
=Setup Microduino-CoreSTM32 with Maple IDE (Windows)=
  
 
* Download Maple IDE on
 
* Download Maple IDE on
Line 10: Line 10:
  
 
* UnZip the Maple IDE into a folder, like C:\maple\
 
* UnZip the Maple IDE into a folder, like C:\maple\
* If you are using Windows XP, just plug Microduino-CoreARM into your USB port,  Open your Device Manager, you will see a Device named "Maple", with a yellow exclamation.
+
* If you are using Windows XP, just plug Microduino-CoreSTM32 into your USB port,  Open your Device Manager, you will see a Device named "Maple", with a yellow exclamation.
 
* Right click on the Maple, Select "Update Driver". Click on "Not this time", then Next.
 
* Right click on the Maple, Select "Update Driver". Click on "Not this time", then Next.
 
* Select the following option: Install from a list or specific location (Advanced), and then click Next.
 
* Select the following option: Install from a list or specific location (Advanced), and then click Next.
 
* Select "Search for the best drivers in these locations", Click on "Include this location in the search, and then Browse into folder like "C:\maple\drivers", Click Next.
 
* Select "Search for the best drivers in these locations", Click on "Include this location in the search, and then Browse into folder like "C:\maple\drivers", Click Next.
* You should now have the CoreARM driver installed.
+
* You should now have the CoreSTM32 driver installed.
  
 
=== If you ar using Windows 7 64bit or Windows 8 ===
 
=== If you ar using Windows 7 64bit or Windows 8 ===
Line 20: Line 20:
 
Try this http://wiki.leaflabs.com/Maple_IDE_Windows_8_Installation
 
Try this http://wiki.leaflabs.com/Maple_IDE_Windows_8_Installation
  
= Programming Microduino-CoreARM =
+
= Programming Microduino-CoreSTM32 =
  
* Make sure you have already installed driver of CoreARM
+
* Make sure you have already installed driver of CoreSTM32
  
* Download and setup Microduino-CoreARM hardware supporting package
+
* Download and setup Microduino-CoreSTM32 hardware supporting package
  
* Run Maple IDE, click menu Tools -> Board, select Microduino-CoreARM to RAM if you just want to test the program, or Microduino-CoreARM to Flash if you want to run the program after resetting the board.
+
* Run Maple IDE, click menu Tools -> Board, select Microduino-CoreSTM32 to RAM if you just want to test the program, or Microduino-CoreSTM32 to Flash if you want to run the program after resetting the board.
  
  
  
 
|}
 
|}

Revision as of 15:00, 11 July 2014

Setup Microduino-CoreSTM32 with Maple IDE (Windows)

  • Download Maple IDE on
   http://leaflabs.com/docs/maple-ide-install.html#maple-ide-install
  • Although the document says Maple only supports WinXP 32-bit, but you can also run it on Windows 7 or Windows 8 with some workaroud.
Download Maple IDE
  • UnZip the Maple IDE into a folder, like C:\maple\
  • If you are using Windows XP, just plug Microduino-CoreSTM32 into your USB port, Open your Device Manager, you will see a Device named "Maple", with a yellow exclamation.
  • Right click on the Maple, Select "Update Driver". Click on "Not this time", then Next.
  • Select the following option: Install from a list or specific location (Advanced), and then click Next.
  • Select "Search for the best drivers in these locations", Click on "Include this location in the search, and then Browse into folder like "C:\maple\drivers", Click Next.
  • You should now have the CoreSTM32 driver installed.

If you ar using Windows 7 64bit or Windows 8

Try this http://wiki.leaflabs.com/Maple_IDE_Windows_8_Installation

Programming Microduino-CoreSTM32

  • Make sure you have already installed driver of CoreSTM32
  • Download and setup Microduino-CoreSTM32 hardware supporting package
  • Run Maple IDE, click menu Tools -> Board, select Microduino-CoreSTM32 to RAM if you just want to test the program, or Microduino-CoreSTM32 to Flash if you want to run the program after resetting the board.