Difference between revisions of "Microduino-Module Zigbee"

From Microduino Wiki
Jump to: navigation, search
 
(8 intermediate revisions by 2 users not shown)
Line 14: Line 14:
  
 
*CC2530 combines high performance of the leading RF transceiver and the standard enhanced 8051 CPU in the industry, owning in-system programmable flash, 8-KB RAM and many other powerful functions.   
 
*CC2530 combines high performance of the leading RF transceiver and the standard enhanced 8051 CPU in the industry, owning in-system programmable flash, 8-KB RAM and many other powerful functions.   
−
*Serial transmission；
+
*Serial transmission;
−
*Reserved CCDEBUG interface, making it easier for users’ second development;   
+
*Reserved CCDEBUG interface, making it easier for users' second development;   
 
*Enough power, easy to reach 100 meters wirelessly;  
 
*Enough power, easy to reach 100 meters wirelessly;  
 
*Small, cheap, stackable and open source;   
 
*Small, cheap, stackable and open source;   
 
*Open source hardware circuit design and Arduino compatible programming development environment;   
 
*Open source hardware circuit design and Arduino compatible programming development environment;   
 
*Uniform Microduino interface standard makes it easy and flexible to connect and extend with other Microduino modules;  
 
*Uniform Microduino interface standard makes it easy and flexible to connect and extend with other Microduino modules;  
−
*2.54mm pin pitch makes it easy to be integrated to a pegboard.  
+
*2.54mm pin pitch makes it easy to be integrated to a pegboard.
  
 
==Specification==
 
==Specification==
 
Specification of electrical application   
 
Specification of electrical application   
 
*RF/Layout  
 
*RF/Layout  
−
**RF transceiver suitable for 2.4-GHz IEEE 802.15.4  
+
**RF transceiver suitable for 2.4-GHz IEEE 802.15.4 ;
−
**Extremely high receiving sensitivity and resistance to interference  
+
**Extremely high receiving sensitivity and resistance to interference ; 
−
**Programing output power is up to 4.5 dBm  
+
**Programming output power is up to 4.5 dBm ; 
−
**System configuration suitable Radio Frequency Regulations: ETSI EN 300 328 and EN 300440 (in Europe), Part 15 FCC CFR47 (in US.) and ARIB STD-T-66 (in Japan)
+
**System configuration suitable Radio Frequency Regulations: ETSI EN 300 328 and EN 300440 (in Europe), Part 15 FCC CFR47 (in US.) and ARIB STD-T-66 (in Japan).
  
 
*Low Power Consumption  
 
*Low Power Consumption  
−
**Active Mode RX (CPU free): 24mA  
+
**Active Mode RX (CPU free): 24mA;
−
**Active Mode TX in 1dBm (CPU free): 29mA   
+
**Active Mode TX in 1dBm (CPU free): 29mA;    
−
**Power Supply Mode 1 (4μs Awaking): 0.2mA   
+
**Power Supply Mode 1 (4μs Awaking): 0.2mA;  
−
** Power Supply Mode 2 (Sleep Timer Running): μA   
+
** Power Supply Mode 2 (Sleep Timer Running): μA;    
−
** Power Supply Mode 3 (External Interrupt): 0.4 μA
+
** Power Supply Mode 3 (External Interrupt): 0.4 μA;
−
**Wide supply voltage range (2 V–3.6 V)    （2 V–3.6 V）
+
**Wide supply voltage range (2 V–3.6 V)    （2 V–3.6 V）.
  
 
*Microcontroller  
 
*Microcontroller  
−
**Fine performance and low-power 8051 microcontroller core with code prefetching function.    
+
**Fine performance and low-power 8051 microcontroller core with code prefetching function;    
−
**256KB in-system programmable flash  
+
**256KB in-system programmable flash;
−
**8-KB RAM, capable of data saving in various power supply modes. 
+
**8-KB RAM, capable of data saving in various power supply mode;
−
**Support hardware debugging  
+
**Support hardware debugging.
  
 
*Peripherals   
 
*Peripherals   
−
**Strong 5-channel DMA   
+
**Strong 5-channel DMA;  
−
**IEEE 802.5.4 MAC timer and general purpose timer. (One is 16-bit and the other is 8-bit timer.)  
+
**IEEE 802.5.4 MAC timer and general purpose timer(One is 16-bit and the other is 8-bit timer.) ;
−
**32-KHz sleep timer with capture function   
+
**32-KHz sleep timer with capture function;  
−
**Hardware support CSMA/CA
+
**Hardware support CSMA/CA;
−
**AES secure coprocessor   
+
**AES secure coprocessor;  
−
**WATCHDOG Timer
+
**WATCHDOG Timer.
  
−
*Pin description：
+
*Pin description:
 
{|class="wikitable"
 
{|class="wikitable"
 
! rowspan="1" | Chip pin || Microduino pin || Function
 
! rowspan="1" | Chip pin || Microduino pin || Function

Latest revision as of 06:01, 4 August 2017

Language: English  • 中文
Microduino-Zigbee

Microduino-Zigbee adopts CC2530 chip, which is a short-distance, simple, low-power, low-rate and low-cost bidirectional wireless communication technology. It is mainly used in data transmission applications among various electronic devices.



Features

  • CC2530 combines high performance of the leading RF transceiver and the standard enhanced 8051 CPU in the industry, owning in-system programmable flash, 8-KB RAM and many other powerful functions.
  • Serial transmission;
  • Reserved CCDEBUG interface, making it easier for users' second development;
  • Enough power, easy to reach 100 meters wirelessly;
  • Small, cheap, stackable and open source;
  • Open source hardware circuit design and Arduino compatible programming development environment;
  • Uniform Microduino interface standard makes it easy and flexible to connect and extend with other Microduino modules;
  • 2.54mm pin pitch makes it easy to be integrated to a pegboard.

Specification

Specification of electrical application

  • RF/Layout
    • RF transceiver suitable for 2.4-GHz IEEE 802.15.4 ;
    • Extremely high receiving sensitivity and resistance to interference ;
    • Programming output power is up to 4.5 dBm ;
    • System configuration suitable Radio Frequency Regulations: ETSI EN 300 328 and EN 300440 (in Europe), Part 15 FCC CFR47 (in US.) and ARIB STD-T-66 (in Japan).
  • Low Power Consumption
    • Active Mode RX (CPU free): 24mA;
    • Active Mode TX in 1dBm (CPU free): 29mA;
    • Power Supply Mode 1 (4μs Awaking): 0.2mA;
    • Power Supply Mode 2 (Sleep Timer Running): μA;
    • Power Supply Mode 3 (External Interrupt): 0.4 μA;
    • Wide supply voltage range (2 V–3.6 V) （2 V–3.6 V）.
  • Microcontroller
    • Fine performance and low-power 8051 microcontroller core with code prefetching function;
    • 256KB in-system programmable flash;
    • 8-KB RAM, capable of data saving in various power supply mode;
    • Support hardware debugging.
  • Peripherals
    • Strong 5-channel DMA;
    • IEEE 802.5.4 MAC timer and general purpose timer(One is 16-bit and the other is 8-bit timer.) ;
    • 32-KHz sleep timer with capture function;
    • Hardware support CSMA/CA;
    • AES secure coprocessor;
    • WATCHDOG Timer.
  • Pin description:
Chip pin Microduino pin Function
RES RST Device reset
SCLK D13 SPI serial clock input (SCLK)
CS A1 SPI CS
MISO D12 SPI MISO
MOSI D11 SPI MOSI
TX RX0（orD2/D4） Serial sending pin (TTL electrical level), capable of connecting single chip microcomputer RXD
RX TX1（orD3/D5） Serial receiving pin(TTL level), capable of connecting MCU TXD

Document

AT command documentation:File:Zigbee AT en.pdf

Development

Projects

Purchase

History

Pictures

Front

Microduino-Zigbee Front

Back

Microduino-Zigbee Back

Video

Retrieved from "https://wiki.microduinoinc.com/index.php?title=Microduino-Module_Zigbee&oldid=21490"