Difference between revisions of "Microduino-Shield Cube-S2"

From Microduino Wiki
Jump to: navigation, search
(→‎Feature)
(→‎Document)
 
(2 intermediate revisions by the same user not shown)
Line 22: Line 22:
 
*Electrical specification   
 
*Electrical specification   
 
**MicroUSB power supply;   
 
**MicroUSB power supply;   
−
**3V3 voltage stabilitation（AMS1117）；
+
**3V3 voltage stabilization（AMS1117）;
−
**PWR can select voltage value by jumpers. (5V or 3.3V) (The default is 3.3V);   
+
**PWR can select voltage value by jumpers(5V or 3.3V) (The default is 3.3V);   
 
**Onboard power supply(5V);   
 
**Onboard power supply(5V);   
 
*Extension  
 
*Extension  
Line 35: Line 35:
 
[[file:Microduino-Cube-S2-Pinout2Big1.jpg|800px|thumb|center|Microduino-Cube-S2-Pinout]]
 
[[file:Microduino-Cube-S2-Pinout2Big1.jpg|800px|thumb|center|Microduino-Cube-S2-Pinout]]
 
[[file:Microduino-Cube-S2-Pinout3Big2.jpg|800px|thumb|center|Microduino-Cube-S2-Pinout]]
 
[[file:Microduino-Cube-S2-Pinout3Big2.jpg|800px|thumb|center|Microduino-Cube-S2-Pinout]]
 +
 
==Document==
 
==Document==
 
Eagle PCB download:   
 
Eagle PCB download:   
 
Main components:   
 
Main components:   
−
*3.3V voltage-stabilizing chip AMS1117： '''[[File:ASM1117.pdf]]'''
+
*3.3V voltage-stabilizing chip AMS1117: '''[[File:ASM1117.pdf]]'''
  
 
==Development==
 
==Development==
Line 47: Line 48:
 
==Application==
 
==Application==
 
===Test [[Microduino-TFT]]===
 
===Test [[Microduino-TFT]]===
−
*Hardware needed: [[Microduino-USBTTL]], [[Microduino-Core]], [[Microduino-Cube-S2]] and [[Microduino-OLED]]；
+
*Hardware needed: [[Microduino-USBTTL]], [[Microduino-Core]], [[Microduino-Cube-S2]] and [[Microduino-OLED]];
−
*Software needed: Arduino IDE(Version 1.0 or higher) [[Microduino Getting started]]；
+
*Software needed: Arduino IDE(Version 1.0 or higher) [[Microduino Getting started]];
−
*Open IDE and select “Examples\_01_Microduino_TFT\examples\ST7735\graphicstest” in File. You need to change pin definition “#define cs   5” and “#define dc   4”;  
+
*Open IDE and select "Examples\_01_Microduino_TFT\examples\ST7735\graphicstest" in File. You need to change pin definition "#define cs 5" and "#define dc 4";  
−
*Select board Microduino-Core (Atmega328P@16M,5V) and download directly after compiling; 
+
*Select board Microduino-Core (Atmega328P@16M,5V) and download directly after compiling.
 +
 
 
==Purchase==
 
==Purchase==
  

Latest revision as of 09:26, 28 September 2016

Language: English  • 中文
Microduino-Cube-S2






Feature

  • Include interfaces of Microduino-TFT and Microduino-OLED(IIC);
  • Onboard analog key as well as sensor interface;
  • With parallel Upin27 interface, easy for connection and extension with other Microduino modules or devices meeting Microduino interface standard;

Specification

  • Electrical specification
    • MicroUSB power supply;
    • 3V3 voltage stabilization（AMS1117）;
    • PWR can select voltage value by jumpers(5V or 3.3V) (The default is 3.3V);
    • Onboard power supply(5V);
  • Extension
    • Onboard reset key;
    • Three IIC interfaces;
    • Serial D2 and D3(Serial1);
    • Two analog sensor interface, connected to A3 and A6 respectively;
    • Three keys, connected to A0, A1 and A2;
    • 1.27mm pitch base board;
Microduino-Cube-S2
Microduino-Cube-S2-Pinout
Microduino-Cube-S2-Pinout

Document

Eagle PCB download: Main components:

Development

It is designed especially for connection with Microduino-TFT , which can also be used together with other Microduino modules and sensors meeting Microduino interface standard.

Microduino-Cube-S2

Application

Test Microduino-TFT

Purchase

History

Image

Microduino-Cube-S2 Front
Microduino-Cube-S2 Back

Vedio

Retrieved from "https://wiki.microduinoinc.com/index.php?title=Microduino-Shield_Cube-S2&oldid=8381"