Difference between revisions of "Microduino-Shield Cube-S2"

Microduino-Cube-S2

Feature

• Include interfaces of Microduino-TFT and Microduino-OLED(IIC);
• Onboard analog key as well as sensor interface;
• With parallel Upin27 interface, easy for connection and extension with other Microduino modules or devices meeting Microduino interface standard;

Specification

• Electrical specification
  • MicroUSB power supply;
  • 3V3 voltage stabilization（AMS1117）;
  • PWR can select voltage value by jumpers(5V or 3.3V) (The default is 3.3V);
  • Onboard power supply(5V);
• Extension
  • Onboard reset key;
  • Three IIC interfaces;
  • Serial D2 and D3(Serial1);
  • Two analog sensor interface, connected to A3 and A6 respectively;
  • Three keys, connected to A0, A1 and A2;
  • 1.27mm pitch base board;

Microduino-Cube-S2

Microduino-Cube-S2-Pinout

Microduino-Cube-S2-Pinout

Document

Eagle PCB download: Main components:

• 3.3V voltage-stabilizing chip AMS1117: File:ASM1117.pdf

Development

It is designed especially for connection with Microduino-TFT , which can also be used together with other Microduino modules and sensors meeting Microduino interface standard.

Microduino-Cube-S2

Application

Test Microduino-TFT

• Hardware needed: Microduino-USBTTL, Microduino-Core, Microduino-Cube-S2 and Microduino-OLED;
• Software needed: Arduino IDE(Version 1.0 or higher) Microduino Getting started;
• Open IDE and select "Examples\_01_Microduino_TFT\examples\ST7735\graphicstest" in File. You need to change pin definition "#define cs 5" and "#define dc 4";
• Select board Microduino-Core (Atmega328P@16M,5V) and download directly after compiling.

Purchase

History

Image

Microduino-Cube-S2 Front

Microduino-Cube-S2 Back

Vedio