Difference between revisions of "Microduino-Module Zigbee"

From Microduino Wiki
Jump to: navigation, search
(Created page with "{{Language|Microduino-Zigbee}} {| style="width: 800px;" |- | 400px|thumb|right|Microduino-Zigbee Microduino-Zigbee adopts CC2530 chip, wh...")
 
(→‎Specification)
Line 68: Line 68:
 
| TX ||RX0（orD2/D4）||Serial sending pin (TTL electrical level), capable of connecting single chip microcomputer RXD   
 
| TX ||RX0（orD2/D4）||Serial sending pin (TTL electrical level), capable of connecting single chip microcomputer RXD   
 
|-
 
|-
−
| RX ||TX1（orD3/D5）||Serial receiving pin(TTL level), capable of connecting MCU’s TXD   
+
| RX ||TX1（orD3/D5）||Serial receiving pin(TTL level), capable of connecting MCU TXD   
 
|}
 
|}
  

Revision as of 08:30, 14 October 2014

Language: English  • 中文
Microduino-Zigbee

Microduino-Zigbee adopts CC2530 chip, which is a short-distance, simple, low-power, low-rate and low-cost bidirectional wireless communication technology. It is mainly used in data transmission applications among various electronic devices.



Features

  • CC2530 combines high performance of the leading RF transceiver and the standard enhanced 8051 CPU in the industry, owning in-system programmable flash, 8-KB RAM and many other powerful functions.
  • Serial transmission；
  • Reserved CCDEBUG interface, making it easier for users’ second development;
  • Enough power, easy to reach 100 meters wirelessly;
  • Small, cheap, stackable and open source;
  • Open source hardware circuit design and Arduino compatible programming development environment;
  • Uniform Microduino interface standard makes it easy and flexible to connect and extend with other Microduino modules;
  • 2.54mm pin pitch makes it easy to be integrated to a pegboard.

Specification

Specification of electrical application

  • RF/Layout
    • RF transceiver suitable for 2.4-GHz IEEE 802.15.4
    • Extremely high receiving sensitivity and resistance to interference
    • Programing output power is up to 4.5 dBm
    • System configuration suitable Radio Frequency Regulations: ETSI EN 300 328 and EN 300440 (in Europe), Part 15 FCC CFR47 (in US.) and ARIB STD-T-66 (in Japan)
  • Low Power Consumption
    • Active Mode RX (CPU free): 24mA
    • Active Mode TX in 1dBm (CPU free): 29mA
    • Power Supply Mode 1 (4μs Awaking): 0.2mA
    • Power Supply Mode 2 (Sleep Timer Running): μA
    • Power Supply Mode 3 (External Interrupt): 0.4 μA
    • Wide supply voltage range (2 V–3.6 V) （2 V–3.6 V）
  • Microcontroller
    • Fine performance and low-power 8051 microcontroller core with code prefetching function.
    • 256KB in-system programmable flash
    • 8-KB RAM, capable of data saving in various power supply modes.
    • Support hardware debugging
  • Peripherals
    • Strong 5-channel DMA
    • IEEE 802.5.4 MAC timer and general purpose timer. (One is 16-bit and the other is 8-bit timer.)
    • 32-KHz sleep timer with capture function
    • Hardware support CSMA/CA
    • AES secure coprocessor
    • WATCHDOG Timer
  • Pin description：
Chip pin Microduino pin Function
RES RST Device reset
SCLK D13 SPI serial clock input (SCLK)
CS A1 SPI CS
MISO D12 SPI MISO
MOSI D11 SPI MOSI
TX RX0（orD2/D4） Serial sending pin (TTL electrical level), capable of connecting single chip microcomputer RXD
RX TX1（orD3/D5） Serial receiving pin(TTL level), capable of connecting MCU TXD

Document

Development

Application

Purchase

History

Pictures

Front

Microduino-Zigbee Front

Back

Microduino-Zigbee Back

Video

Retrieved from "https://wiki.microduinoinc.com/index.php?title=Microduino-Module_Zigbee&oldid=6494"