Difference between revisions of "Microduino-Module Zigbee"

From Microduino Wiki
Jump to: navigation, search
(→‎Specification)
 
Line 27: Line 27:
 
**RF transceiver suitable for 2.4-GHz IEEE 802.15.4 ;
 
**RF transceiver suitable for 2.4-GHz IEEE 802.15.4 ;
 
**Extremely high receiving sensitivity and resistance to interference ;   
 
**Extremely high receiving sensitivity and resistance to interference ;   
−
**Programing output power is up to 4.5 dBm ;   
+
**Programming output power is up to 4.5 dBm ;   
 
**System configuration suitable Radio Frequency Regulations: ETSI EN 300 328 and EN 300440 (in Europe), Part 15 FCC CFR47 (in US.) and ARIB STD-T-66 (in Japan).
 
**System configuration suitable Radio Frequency Regulations: ETSI EN 300 328 and EN 300440 (in Europe), Part 15 FCC CFR47 (in US.) and ARIB STD-T-66 (in Japan).
  

Latest revision as of 06:01, 4 August 2017

Language: English  • 中文
Microduino-Zigbee

Microduino-Zigbee adopts CC2530 chip, which is a short-distance, simple, low-power, low-rate and low-cost bidirectional wireless communication technology. It is mainly used in data transmission applications among various electronic devices.



Features

  • CC2530 combines high performance of the leading RF transceiver and the standard enhanced 8051 CPU in the industry, owning in-system programmable flash, 8-KB RAM and many other powerful functions.
  • Serial transmission;
  • Reserved CCDEBUG interface, making it easier for users' second development;
  • Enough power, easy to reach 100 meters wirelessly;
  • Small, cheap, stackable and open source;
  • Open source hardware circuit design and Arduino compatible programming development environment;
  • Uniform Microduino interface standard makes it easy and flexible to connect and extend with other Microduino modules;
  • 2.54mm pin pitch makes it easy to be integrated to a pegboard.

Specification

Specification of electrical application

  • RF/Layout
    • RF transceiver suitable for 2.4-GHz IEEE 802.15.4 ;
    • Extremely high receiving sensitivity and resistance to interference ;
    • Programming output power is up to 4.5 dBm ;
    • System configuration suitable Radio Frequency Regulations: ETSI EN 300 328 and EN 300440 (in Europe), Part 15 FCC CFR47 (in US.) and ARIB STD-T-66 (in Japan).
  • Low Power Consumption
    • Active Mode RX (CPU free): 24mA;
    • Active Mode TX in 1dBm (CPU free): 29mA;
    • Power Supply Mode 1 (4μs Awaking): 0.2mA;
    • Power Supply Mode 2 (Sleep Timer Running): μA;
    • Power Supply Mode 3 (External Interrupt): 0.4 μA;
    • Wide supply voltage range (2 V–3.6 V) （2 V–3.6 V）.
  • Microcontroller
    • Fine performance and low-power 8051 microcontroller core with code prefetching function;
    • 256KB in-system programmable flash;
    • 8-KB RAM, capable of data saving in various power supply mode;
    • Support hardware debugging.
  • Peripherals
    • Strong 5-channel DMA;
    • IEEE 802.5.4 MAC timer and general purpose timer(One is 16-bit and the other is 8-bit timer.) ;
    • 32-KHz sleep timer with capture function;
    • Hardware support CSMA/CA;
    • AES secure coprocessor;
    • WATCHDOG Timer.
  • Pin description:
Chip pin Microduino pin Function
RES RST Device reset
SCLK D13 SPI serial clock input (SCLK)
CS A1 SPI CS
MISO D12 SPI MISO
MOSI D11 SPI MOSI
TX RX0（orD2/D4） Serial sending pin (TTL electrical level), capable of connecting single chip microcomputer RXD
RX TX1（orD3/D5） Serial receiving pin(TTL level), capable of connecting MCU TXD

Document

AT command documentation:File:Zigbee AT en.pdf

Development

Projects

Purchase

History

Pictures

Front

Microduino-Zigbee Front

Back

Microduino-Zigbee Back

Video

Retrieved from "https://wiki.microduinoinc.com/index.php?title=Microduino-Module_Zigbee&oldid=21490"