Difference between revisions of "Microduino-Sensorhub"

Latest revision as of 06:57, 29 January 2016

Language:	English • 中文

Microduino-Sensorhub is designed for Microduino Sensor Series, which is easy for connection between sensors and core modules.

Electric Level of the Pin:
- The default level of the IIC interface is 3.3V and that of the other IO ports is 5V.
- You can adjust the connection of the jumper wires to change the level of the other IO ports if there is the need.

Stacked with Microdduino core module with Microduino sensors connected outside. Choose different interface according to various sensors.
- For Microduino-OLED, you need to select IIC interface;
- For Microduino-KEYBOARD, you will need analog interface;

600px

600px

@@ Line 20: / Line 20: @@
 ==Specification==
-*Include digits, analog, serial port and IIC interface;
+*Contain digit interface, analog interface, IIC interface and the serial port.
-*Rules of sensor interface: GND, VCC, signal 1 and signal 2;
+*Rules of sensor interface: GND, VCC, signal 1 and signal 2.
-*Two IIC interfaces including Serial and Serial1.
+*Two IIC interfaces
+*Pin Description:
-*Pin Description:
 [[file:SENSORHUBtips.jpg|thumb|400px|center]]
@@ Line 30: / Line 30: @@
 *Electric Level of the Pin:
 **The default level of the IIC interface is 3.3V and that of the other IO ports is 5V.
-**You can adjust the connection of the jumper wires to change the level of the other IO ports if there is a need.
+**You can adjust the connection of the jumper wires to change the level of the other IO ports if there is the need.
 [[file:Sensorjump.jpg|thumb|400px|center]]