|
|
| Line 79: |
Line 79: |
| | ==History== | | ==History== |
| | | | |
| − | *2013年6月23日，批量完成，正式上架。 | + | *June 23, 2013, Batch completed, formal shelves. |
| − | *2013年6月2日，第二次打样测试完成，暂未发现问题，面板批量完成。 | + | *June 2, 2013，Second proofing test is completed, No problems found so far, panel batch is complete. |
| − | *2013年5月18日，测试样板出炉，无上电复位电路，飞一个电容解决。 | + | *May 18, 2013，Test model came out, no power-on reset circuit, not a capacitor resolved. |
| − | *2013年5月16日，样板出炉，有小问题。 | + | *May 16, 2013，Model released, there is a small problem. |
| − | *2013年5月7日，布板完成。 | + | *May 7, 2013，Layout is complete. |
| | | | |
| | | | |
| | |- | | |- |
| | | | | | |
| − |
| |
| − |
| |
| − |
| |
| | | | |
| | ==Pictures== | | ==Pictures== |
|
Microduino-Oled 12864 is based SSD1306 0.96 inch 12864 OLED display module. Using the I2C interface, 3.3V power supply.
|
Features
- Active light, no backlight, large-angle range;
- Low driving voltage, low power consumption;
- I2C mode of communication, saving IO port, widely used;
- Small, cheap, open source;
- Open source hardware circuit design, compatible with the Arduino IDE development environment for programming process;
- Microduino unified interface specification, and rich peripheral modules can be easily and flexibly with other eligible Microduino interface specification modules, sensors for quick connection and expansion;
|
Specifications
- Resolution：128x64；
- Interface： IIC communication；
- Power supply：3.3V；
|
Documents
Eagle PCB File:Microduino-Oled.zip
main components
|
Development
|
Applications
basic usage sample program of u8glib library
Note：core's IIC interface is A4（SDA），A5（SCL），core+'s IIC interface is D20（SDA），D21（SCL）
- put your downloaded library in to libraries within Arduino IDE installation folder, If open Arduino IDE, please close all other example program before you open example program within u8glib library;
- Open the HelloWorld sample program, cancel comment for this line: U8GLIB_SSD1306_128X64 u8g (U8G_I2C_OPT_NONE) (remove "/ /"), the compiler can be downloaded directly through after the download is complete, then "Hello World!" Is displayed on the screen;
- Display character / variables:
- Use u8g.print (xx) function can be, usage are basically as same as Serial.print (xx).
- Change the font：
- Use u8g.setFont (xx) function to change the font, parentheses "xx" can be replaced by the corresponding font library name (you can search font library in u8g.h within U8glib \ utility folder);
- Recommended large font: u8g_font_7x13, recommended font: u8g_font_fixed_v0r, recommended small fonts: u8g_font_chikitar;
- Change coordinates:
- Use u8g.setPrintPos (x, y) function, if you want to change the display coordinates
- Screen Rotation：
- Comment u8g.setRot180() in void setup() function, you flip the screen 180 degrees, you can also change 180 to 90,270;
|
Buy
|
History
- June 23, 2013, Batch completed, formal shelves.
- June 2, 2013，Second proofing test is completed, No problems found so far, panel batch is complete.
- May 18, 2013，Test model came out, no power-on reset circuit, not a capacitor resolved.
- May 16, 2013，Model released, there is a small problem.
- May 7, 2013，Layout is complete.
|
Pictures
|
|
|
