|
The product number of Sensor—Gesture is: MSDI81
Sensor-Gesture can detect the movement direction and the distance of hands.
Instruction of Pins
|
- Pins of the sensor:
- PIN1: GND
- PIN2: VCC
- General signal pins:
- PIN3(IO1): digital/analog signal
- PIN4(IO2): NC(null)
- Special signal pins:
- If it is IIC: IO1/IO2 are respectively SDA/SCL.
- If it is soft serial port: IO1/IO2 are respectively tx/rx.
|
Microduino sensor can communicate with core module through the connection with Microduino-Module Sensor Hub.
|
Features
- Adopts APDS9960 sensor and IIC communication.
- With high detection and good stability.
- With small size which is easy to install.
Specification
- Size of the sensor
- Sensor of the board: 23.5mm*13mm
- 1.27mm-spacing 4Pin interface connected with sensorhub
- CAD drawing of the sensor:File:Sensor CAD.zip
- This sensor can detect the movement direction and the distance of hands.
- This sensor can detect the environment light and the RGB chroma.
- Connection
- This sensor can be connected to the I2C interface of core.
Document
Development
Program Download
Programming
Hardware Setup
Result
- After download, open the serial monitor.
- Move your hands to left and right toward the sensor, and the serial monitor will print out the corresponding direction, such as UP, DOWN, FAR and so on.
Application
- It can be used in gesture control system.
Projects
Purchase
Gallery
|