Temperature & Humidity S2 (use with mDesigner)

The Temperature & Humidity (S2) sensor is a capable of measuring the current temperature and humidity near the sensor. Support for this sensor is found in mDesigner.

Note: Several sensors may be similar, but this page only covers the TEM&HUM-S2 sensor.

Compatible Pins

The following pins on the Hub or mCenter+'s Hub support this module:

Pin Name	Compatibility	Notes
Pin 0	No
Pin 1	No
Pin 2	No
Pin 3	No
Pin 4	No
Pin 5	No
Pin 6	No
Pin 7	No
Pin 8	No
Pin 9	No
Pin 10	No
Pin 11	No
Pin 12	No
Pin 13	No
Pin A0	No
Pin A1	No
Pin A2	No
Pin A3	No
Pin A6	No
Pin A7	No
Pin I2C	Yes	Any I2C / IIC pin.