Template:ST Pinout
From Microduino Wiki
Revision as of 21:33, 30 March 2017 by Sonny (talk) (Created page with "<div style="float: left;"> File:Sensor_backpin.png </div> <div style="float: left"> {| class="wikitable" |+ style="text-align: Center;" | <big>{{{st_name|Unknown}}}</big>...")
| General Pin Out | Sensor / Trinket's Pin Out |
|---|---|
| PIN1 (GND) | GND |
| PIN2 (VCC) | VCC |
| PIN3 (GPIO-A) | Not Connected |
| PIN4 (GPIO-B) | Not Connected |
- General Pin Out is the standard pin out of a Sensor / Trinket connector.
- Sensor / Trinket's Pin Out is this specific Sensor / Trinket's wiring in relation to the General Pin Out.
- GPIO-A / GPIO-B are signals that could be digital input, digital output, analog input or analog output. Or special signals such as serial communication (SoftwareSerial, IIC (I2C), etc) or other special signals.
- Not Connected refers to the Pin is not used for this particular Sensor / Trinket.
- Read more about the hub module.
