Template:ST Pinout
From Microduino Wiki
| General Pin Out | Sensor / Trinket's Pin Out |
|---|---|
| PIN1 (GND) | GND |
| PIN2 (VCC) | VCC |
| PIN3 (GPIO-A) | Not Connected |
| PIN4 (GPIO-B) | Not Connected |
- General Pin Out is the standard pin out of a Sensor / Trinket connector.
- Sensor / Trinket's Pin Out is this specific Sensor / Trinket's wiring in relation to the General Pin Out.
- GPIO-A / GPIO-B are signals that could be digital input, digital output, analog input or analog output. Or special signals such as serial communication (SoftwareSerial, IIC (I2C), etc) or other special signals.
- Not Connected refers to the Pin not being used for this particular Sensor / Trinket.
- Read more about the hub module.
