Getting started: mDesigner for Mac

From Microduino Wiki
Revision as of 19:29, 23 October 2018 by Sonny (talk | contribs)
Jump to: navigation, search

The guide below is a software setup guide for mDesigner (v1.6) under the Mac platform aimed for use with Itty Bitty Buggy.

Download

Download the latest mDesigner (for Mac): HERE

MDesigner Download.png

Installation

Step 1:

Once the download is complete. Find the downloaded file on your computer.

Safari Chrome
MDesigner v1.6 InstallGuide For Mac 00 Safari.png MDesigner v1.6 InstallGuide For Mac 00 Chrome.png

MDesigner v1.6 InstallGuide For Mac 01.png

Step 2:

Important: Hold down the CTRL key on your keyboard, then click on the file. This will bring up the options menu for the file. Click on Open.

MDesigner v1.6 InstallGuide For Mac 02.png

Step 3:

Confirm you wish to Open the file. If you do not see the Open option. Please refer to the previous step.

MDesigner v1.6 InstallGuide For Mac 03.png
MDesigner v1.6 InstallGuide For Mac 03e.png
MDesigner v1.6 InstallGuide For Mac 04.png
MDesigner v1.6 InstallGuide For Mac 05.png
MDesigner v1.6 InstallGuide For Mac 06.png
MDesigner v1.6 InstallGuide For Mac 07.png
MDesigner v1.6 InstallGuide For Mac 08.png
MDesigner v1.6 InstallGuide For Mac 09.png
MDesigner v1.6 InstallGuide For Mac 10.png
MDesigner v1.6 InstallGuide For Mac 11.png
MDesigner v1.6 InstallGuide For Mac 12.png
MDesigner v1.6 InstallGuide For Mac 13.png

Retrieved from "https://wiki.microduinoinc.com/index.php?title=Getting_started:_mDesigner_for_Mac&oldid=22870"