Somatosensory interaction - Microduino V1

Language:	English  • 中文

Objective This tutorial will teach you using the Microduino V1 module to control the movement of a smile face in Processing. Equipment Microduino-Core Microduino-FT232R Microduino-V1 Other equipment USB cable one Schematic Use Microduino-V1 to control Program Refers to ProcessingMicroduinoV1 ProcessingMicroduinoV1Arduino Debug Step 1：Set up hardware system, as follows: Step 2: Explain the code: This example needs two parts code, one is Processing and the other is Microduino. Microduino: //Check if which button was pressed, and send the result to Processing. if(button<40) key_up=2; else if(button>50&&button<100) key_up=4; else if(button>138&&button<141) key_up=1; else if(button>358&&button<361) key_up=3; else if(button>228&&button<231) key_up=5; Processing: //Get the first serial port data, // is always my Arduino, so I open Serial.list()[0]. // Open whatever port is the one you're using. myPort = new Serial(this, Serial.list()[0], 9600); myPort.bufferUntil('\n'); // Trigger a SerialEvent on new line //Use the ddat the Microduino sent to control the movement of smile face. if (val != null) { val = trim(val); println(val); buttonValue=Integer.parseInt(val); switch(buttonValue) { case 1: yPos++; break; case 2: xPos--; break; case 3: xPos=400; yPos=200; break; case 4: xPos++; break; case 5: yPos--; break; default : } image(face, xPos, yPos); } Step 3: Compile the code and download it. Step 4：After running, put Microduino V1's button, observe the smile face's movement. Result You can use the button to control the smile face, as follows: Video