Microduino-Shield Cube-S2

Language:	English  • 中文

Microduino-Cube-S2 Feature Include interfaces of Microduino-TFT and Microduino0-OLED(IIC)； Onboard analog key as well as sensor interface; With parallel Upin27 interface, easy for connection and extension with other Microduino modules or devices meeting Microduino interface standard; Specification Electrical specification MicroUSB power supply; 3V3 voltage stabilitation（AMS1117）； PWR can select voltage value by jumpers. (5V or 3.3V) (The default is 3.3V); Onboard power supply(5V); Extension Onboard reset key; Three IIC interfaces; Serial D2 and D3(Serial1); Two analog sensor interface, connected to A3 and A6 respectively; Three keys, connected to A0, A1 and A2; 1.27mm pitch base board; Microduino-Cube-S2 Microduino-Cube-S2-Pinout Microduino-Cube-S2-Pinout Document Eagle PCB download: Main components: 3.3V voltage-stabilizing chip AMS1117： File:ASM1117.pdf Development It is designed especially for connection with Microduino-TFT , which can also be used together with other Microduino modules and sensors meeting Microduino interface standard. Microduino-Cube-S2 Application Test Microduino-TFT Hardware needed: Microduino-USBTTL, Microduino-Core, Microduino-Cube-S2 and Microduino-OLED； Software needed: Arduino IDE(Version 1.0 or higher) Microduino Getting started； Open IDE and select “Examples\_01_Microduino_TFT\examples\ST7735\graphicstest” in File. You need to change pin definition “#define cs 5” and “#define dc 4”; Select board Microduino-Core (Atmega328P@16M,5V) and download directly after compiling; Purchase History Image Microduino-Cube-S2 Front Microduino-Cube-S2 Back Vedio