Lazy Donkey
From Microduino Wiki
Language: | English • 中文 |
---|
ContentsOverviewMr. donkey is always too lazy to work. Only by knocking on the desk will he get to work. SchematicUse shock sensor detects the beat, and then let the motor run some distance the donkey forward. User can set the speed and duration time of donkey running. Equipment
Preparation
program should have successfully been uploaded into the CoreUSB. Program description
#define motor_pinB 6 //Motor 1
#define motor_pinA 8 //Motor 1
//#define servo_pinB 5 //Motor 2
//#define servo_pinA 7 //Motor 2
const int vibrationPin = 10; // Shack sensor
adjust to any value from 0 to 255 (recommended value not less than 60, or may be triggering Movies sensor stability).
modify it as needed. void fullForward() {
//digitalWrite(motor_pinB, HIGH);
analogWrite(motor_pinB,255);//0-255
digitalWrite(motor_pinA, LOW);
delay(1000);
} Hardware Buildup
corresponding ports on the Hub module.
attachment to other devices.
finished building the circuit! ResultTapping the table, shock sensor detects vibrations, the donkey moves forward 1 second. Video |